Burning engine oil is mostly caused by the piston rings being stuck with carbon deposits. Relying on adding high-viscosity engine oil to extend life is just a stop-gap measure that only cures the problem but not the root cause. The engine's power is poor and its fuel consumption is high because the oil participates in combustion and forms more carbon deposits. The carbon deposits in turn increase the level of oil burning, forming a vicious cycle. Excessive carbon deposits will clog the fuel injector, resulting in poor atomization and poor combustion. If this continues, the cylinder wall will be strained, or even the cylinder will explode, and in the end the engine will have to be dismantled for overhaul.
Solutions to oil burning
In the inertial thinking of car enthusiasts, they always think that oil burning should be solved by overhaul. This will not only bear high maintenance costs, but also bear the burden of the vehicle. Unpredictable risks and depreciation losses caused by overhaul. Destroy the tightness and precision of the engine. Moreover, it is possible to burn oil again after tens of thousands of kilometers, so overhauling the engine is not sustainable.
The current disassembly-free technology is very mature and gradually accepted by the majority of car owners. In particular, Si Youpu's non-destructive repair products containing PNF patented technology have completely got rid of the technical shackles of having to go to an auto repair shop to operate. Without removing a single screw, the car owner can operate it by himself. It can repair and release stuck piston rings and burn engine oil while driving, and the effect is Significantly.