To check the balance of the gas meter, just find the gas meter at home, insert the gas magnetic card into the meter, and the balance data of the gas balance so far will be displayed in the meter. The specific steps are as follows:

1. First find the location of the gas meter in use, as shown below.

2. Next, insert the IC card of gas into the position shown in the figure, that is, the card slot on the electric meter;

3. After insertion, you will hear the promotion prompt. At this time, the gas meter will display the following data, and the red box is the square number of natural gas used;

4. The display screen below the gas meter shows the balance data of the gas meter, that is, the total cost that the meter can use.

Extended data:

1. In case of gas meter leakage or other abnormal phenomena, report it to the gas company immediately, and do not handle it without authorization to avoid danger.

2. The gas pipeline shall not be modified without authorization, and the gas meter shall not be removed or modified without authorization.

3. Keep the outside of the gas meter clean and hygienic. The gas meter must not contact corrosive substances. Oil stains and dust on the surface of the gas meter should be gently wiped clean with a wet cloth at any time.

4. It is forbidden to place items on the gas meter to avoid heavy objects colliding.