1. Open the fruit and adjust the speed to 128bpm. Add the sytrus plug-in to the channel. If you are using the English version, find the channel on the left and you will see the sytrus plug-in as shown below

2. The syturs plug-in defaults to a string tone in the fruit software, so here we need to modulate its sound to the factory tone, so we click on the right side of the sytrus plug-in and select default, which is the factory setting. As shown in the picture

3. The next step is very critical in this part. What you need to do in this tone is to use op2 to modulate op1. So go back to op2 and change the waveform type of op2 to square, which is square. Waves, as shown in the picture

4. Next is the addition of various effects. You can first add a quantization plug-in, such as the first one to add waveshaper. The step is to send the mixing channel of this sound to the idle Status

5. After adding the above plug-ins, the sound is basically similar. Now you can add some other modification effects. Can you see the picture?

Notes

1. Be sure to initialize the loaded syturs. Wrong selection of the type will affect the similarity of the timbre, so pay more attention.