1. CD ripping tutorial
There is no need to use external software to rip audio tracks from CD and save them in the required format. The files after ripping the audio tracks are already It is a compressed file, and the sound quality is certainly not as good as CD sound quality, but the ears generally cannot hear it. Specific CD ripping method:
1. First put the disc into the optical drive. The machine I am trying out only has a DVD burner. After putting it in, the following selection box pops up a moment later:
2. Click Cancel and then double-click on the desktop to start the downloaded SCDP (short for Smart CD Ripper), as shown below:
3. The first choice is to determine the storage location of the captured files as shown below:
p>
4. After clicking Browse: Select the saved folder or other storage location in the pop-up selection box as shown in the figure:
5. Select the relevant attributes of the captured MP file. Settings, click Settings on the operation bar, the following window will pop up, the settings in the MP3 column are as shown below:
6. After all settings are completed, the capture and conversion will start, click Extract on the operation bar as follows Picture:
7. The software starts to capture in sequence, as shown below
8. Then, in the set output folder, we can find the converted CD tracks. MP3 files
2. How to rip CD tracks into WAV files
1. First, execute the main program of Exact Audio Copy (hereinafter referred to as EAC) and open the main interface of EAC;
p>
2. Then open the "Drive Options" in the EAC item of the menu bar and prepare to set the "Ratch Mode"
Note: This is very critical and directly affects the captured track. Audio quality
cd002e76c4e22d36d5621">
3. "Ratch Mode" setting: It is recommended to use precise streaming, disable caching, and safe mode without C2 to capture tracks.
Notes:
A. The burst mode capture track is only read once, and other modes read it twice. The data captured twice will be passed if they are the same. If they are different, they will be captured again. If they are the same, they will be passed. , so the data captured in safe mode is guaranteed.
B. Disable caching, that is, do not put the data into the cache, and start recording after comparing the two data read. It is recommended to disable it. /p>
C. If you use C2, the drive will automatically correct errors on the disc. If you do not use C2, there will be no error correction. If you are pursuing the original effect, it is recommended not to use C2.
4. Fill in the necessary information, such as: CD title, CD artist, CD year, etc.
5. Select the capture file type: There are usually two ways to capture CDs, one is the entire The CD is ripped into a WAV file (called "full track"). The CD extracted by this method is the same as the master CD. The other method is recommended to separate the tracks into individual WAV files (called "split"). Track"), split tracks cannot create CD list CUE files, so it is recommended to use the "whole track" method to capture.
Note: The whole track method is better than the split track method. It can be captured into a whole track and can be used at any time. The CUE list generates split-track song files. At the same time, when burning a CD, the entire track method retains the gaps between the songs on the original CD disc (original flavor); therefore, it is recommended that you capture the entire track when ripping.
6. Select the folder on the hard disk where the captured files will be saved.
7. Start ripping.
8. Save the log file and the ripping is completed.
That’s OK!
3. How to rip a CD into a WAV file?
How does eac rip a CD into a WAV file, capture the WAV audio track, and generally convert it after capturing the WAV Save it in a lossless format. There are two ways to use EAC to capture WAV audio tracks. One is to capture the entire track WAV file and CUE file of the entire CD, and the other is to capture single WAV files separated one by one. The "track" in grabbing tracks means audio tracks.
Because the storage format of CD is different from ordinary files, files cannot be copied from the disc using direct copy. Therefore, third-party software must be used to complete this function, and this function is called ripping.
Chinese version of Exact Audio Copy: /soft/27543
(01) First, execute the main program of Exact Audio Copy (hereinafter referred to as EAC) and open the main interface of EAC;
(02) Then open the "Drive Options" in the EAC item of the menu bar and prepare to set the "Ratch Mode"
Note: This is very critical and directly affects the captured track. Audio quality
(03) "Track mode" setting: It is recommended to use precise streaming, disable caching, and do not use C2's safe mode to grab tracks.
Note:
A. The track capture is only read once in burst mode, and twice in other modes. The data captured twice will be passed if they are the same. If they are different, they will be captured again. Only if they are the same will they pass, so the data captured in safe mode is guaranteed.
B. Disable caching, that is, do not put the data into the cache, and start recording after comparing the two data read. It is recommended to disable it.
C. If you use C2, the drive will automatically correct errors on the disc. If you do not use C2, there will be no error correction. If you are pursuing the original effect, it is recommended not to use C2.
(04) Fill in the necessary information, such as: CD title, CD artist, CD year, etc.
(05) Select the capture file type: usually the form of CD capture is There are two types. One is to rip the entire disc into a WAV file (called "full track"). The CD extracted in this way is the same as the master CD, so it is recommended. The other method is to separate the tracks and capture a single WAV (called "track splitting"). Track splitting cannot create a CD list CUE file, so it is recommended to use the "whole track" method to capture.
Note:
The whole track method is better than the split track method. After grabbing the whole track, you can use the CUE list at any time to generate the split track song files. At the same time, when burning the CD, the whole track will be generated. The gap between the songs on the original CD is preserved in track mode (original flavor); therefore, it is recommended that you capture the entire track when ripping.
(06) Select the folder in which the captured files are saved on the hard disk.
(07) Start tracking!
(08) Save the log file and the track capture is completed!
4. How to get the best sound quality when ripping music CDs to a computer
wmp can compress wma or wma, but I personally feel it is not easy to use.
A few I have been using Haojie to catch me for years, and then there are more and more viruses targeting Haojie on the Internet
Kingsoft Jieba’s own audio/video compression tool. I recommend it. It can modify the MP3 compression ratio. Compression ratio The lower the value, the better the sound quality is preserved.
WAV is a high-quality compression format, but the disadvantages are still the same. The large file capacity and low compression ratio of MP3 are actually similar. If you are using a mobile phone or Other playback devices may not support WAV. You can choose MP3 with a low compression ratio (generally a song is 10-20M)
The method of use is very simple. Find Jinshan in [Start]-[Program] Jieba, there is a directory called "Utilities" there. After inserting the CD, all the songs will be displayed on it, and you can also listen to them. Check the box in front of the song you want to capture, and click Start , that's it. If you want to modify it, there is a setting area next to it, where you can modify the compression ratio
High compression formats such as RM and RAM basically have distortion.
5. How to rip tracks
Many people don’t know much about CD ripping, or the audio tracks they rip are not very clear. In fact, everyone can use it, but they use different software. Many people use it to rip tracks. It's more like recording than ripping, so the sound quality isn't very good. As a DJ, I recommend you to use the Easy CD-DA Extractor software. I use 5.
Some versions of 0 require registration, but generally some have a registration code included. You can install it according to the prompts
After installation, open the software and put the CD to be ripped into the optical drive. The software will display it for you. You can choose the speed and save it on which disk. You can choose the high or low sound quality of the music after ripping. You can also choose the format. For example, you can choose MP3 or anything. I hope my answer can give you some help. I can't post the picture now because I am I just registered this account. I could have sent you all the pictures and steps. Now you have to figure it out on your own. I believe you will understand! ! ! ! Haha
6. How to capture audio tracks
The best free audio capture software is Qianqianjingting! Right-click the file and click Convert Format (stop the music first! Otherwise it will prompt that the CD file cannot be extracted). You can choose WAV as the format and capture it at the original code rate! ! 1Kbps is a lot.
The bigger thing is, six minutes of 1.41Mbps music captured will be 60M. You can also choose APE lossless format, which is Monkey's Audio format, but when converted, the bit rate is actually lossy! The 1.41M has become 868K, but it is much smaller, only 30M. In fact, it is enough to put it in ordinary devices (some MP3 cannot be played).
If you put it in MP3, it will be converted to MP3 with a maximum bit rate of 320K (this is the limit of MP3). Finally, let’s talk about track ripping and copy it from Baidu Encyclopedia: “CD ripping is a multimedia term, which is the process of ripping CD audio tracks and converting them into MP3, WAV and other audio formats.
Code and decode audio with ordinary The difference in conversion is that when viewed on a computer, our common CD discs include files with the suffix CDA. If you look closely, you will find that the sizes of these CDA are all 44.1K. These files do not actually contain audio information, but CD track information cannot be saved directly to the computer, and CD ripping is the multimedia technology needed to convert CDs into ordinary audio and save them to the computer.”
7. How to convert cd to
The music on the CD is not a digital file in the true sense. Its file format is cda, which is only more than 40 KB and is just an index. .
The real meaning of CD music is audio tracks. Therefore, to convert CD music into digital files and store them on a computer disk, the method is: track ripping.
There are many software and methods for grabbing tracks, such as: Rabbit Tail Tracking, Qianqianjing Listening Conversion. In Windows Media Player, there is also this grabbing function. The specific method is:
< p> 1. Insert the CD into the CD-ROM drive.2. Open Windows Media Player
3. Tools--Options, as shown below:
When you open Windows Media Player for the first time, there may be no tool menu, and the tools will be displayed. The menu method is: Organize--Layout--Show menu bar
4. Click to rip music, as shown below:
5. Select the track on the CD, as shown below:
6. After selecting the storage path and naming, click OK.