How to install ultraviolet lamp tube
1. Check whether the sleeve and tube of the ultraviolet lamp are damaged.
2. Open the end cover of the ultraviolet lamp and put away the screw rubber pad to prevent it from falling.
Wash your hands and wear disposable medical gloves. The ultraviolet sleeve should be wiped clean with alcohol. Insert the middle finger into the sleeve and pass through the ultraviolet housing.
4. Hold the sleeve with your fingers at one end and fix the end plate with a rubber pad at the other end. After one side is fixed, fix the other side. Can't be fixed with rubber pad at the same time.
5. Wipe the lamp with alcohol and hold the magnetic heads at both ends of the lamp with your hands. When you hold the glass part of the lamp, it will pollute the lamp. If your hands are not cleaned, bacteria will adhere to the wall of the lamp, thus affecting the sterilization ability of the ultraviolet lamp.
Matters needing attention in the use of ultraviolet lamp tube
1. During disinfection, doors and windows can be closed after work in the afternoon, and the disinfection time should not be less than 30 minutes each time. During disinfection, personnel are forbidden to enter the room, and when they have to enter because of work needs, the irradiation should be stopped.
2, disinfection, to spread out the sheets, expand the irradiation surface, the effective distance of one meter, irradiation time of not less than 30 minutes.
3. The use environment of ultraviolet lamp should be clean, and there should be no dust and water mist in the air. The biggest thing is to wait until the ground is dry before disinfecting the ultraviolet lamp.
4. The ultraviolet lamp tube should be kept clean and free of dust. It must be wiped once a week with 75% ethanol cotton balls. When dust and oil stains are found on the surface of the lamp tube, they should be wiped at any time.
5. Ultraviolet rays will do some harm to human skin, so pay attention to protection.
Do not look directly at the ultraviolet light source. 6, every time you use the ultraviolet lamp, you should record it once, and use the ultraviolet intensity indicator card to test it once every six months, and paste the results in the record book. When the external lamp is not less than 70UW/cm after testing 1000 hours, it should be tested every 30 hours, and it should be replaced when the irradiation intensity is less than 70UW/cm.
Application scope of ultraviolet lamp
Ultraviolet lamp has a long history of development, and its technology is constantly improving. It is widely used in modern life. The application scope of ultraviolet lamp disinfection includes: hospital disinfection, kitchen disinfection, living room disinfection, bathroom disinfection and other places. Ultraviolet lamp disinfection will not produce any pollution and influence, can ensure the environment pollution-free, and plays a very important role in people's lives.
Editor's summary: So much for the installation and use of ultraviolet lamps. I hope it helps you. If you want to know more, you can pay attention to the information of decorating the security network.