Shape name:

Pine cone flower knife, spherical flower knife.

Forming method:

When machining, push the knife on the raw material with an inclined knife, the depth is 4/5 of the thickness of the raw material, and the feed angle is 45? ; Turn the oblique knife to another angle, the feed depth is 4/5 of the raw material thickness, and the feed inclination angle is 45? ; The angle of intersection between the two knives is 45? Then change the knife and cut into pieces with a width of 4cm and a length of 5cm. When heated, it will curl into a pictographic pine cone shape.

Applicable raw materials:

Squid, cuttlefish and so on.

Use example:

Used to make "sweet and sour squid rolls" and "fried cuttlefish flowers".

Processing requirements:

Litchi-shaped flower knife.

Wheat spike flower knife

▼

The grain of spike flower knife is made by pushing with a straight knife and pushing with an oblique knife.

Shape name:

Ear of wheat, ear of wheat

Forming method:

The main difference between barley ear and wheat ear lies in the change of wheat ear length. Old people are called barley ears, and short people are called wheat ears. The processing methods are basically the same.

When processing, push it with an inclined knife, with an inclined angle of about 40? The depth of the die is three fifths of the thickness of the raw material; Turn another angle to push the straight knife, and the straight knife intersects the inclined knife by 70? ~80? Preferably, the depth is four fifths of the raw material. Finally, change the knife into blocks, heat it and roll the knife pattern into the shape of wheat ears.

Applicable raw materials:

Kidney, squid and so on.

Use example:

Used to make "fried kidney flowers" and "fried squid rolls".

Processing requirements:

The cutter distance, feed depth and oblique cutter angle should be consistent. The smaller the inclination angle of the ear cutter, the longer the ear. The inclination angle of the ear planer should be flexibly adjusted according to the thickness of raw materials.