Information: Gift packaging method (1)-the basic method of bowing. Nothing, even if there is no wrapping paper or box, is not packed in a bag. As long as you tie a ribbon, it will become a gift at an incredible moment.

If you wear a beautiful bow, it will immediately add charm to the gift itself. Tie the bow: 1. Tie a knot at both ends of the ribbon. 2. Hold the middle position with your hand and bend the silk on the right irregularly into a circle. 3. Fold the ribbon on the left side from above and press it with the thumb of the right hand. 4. Go around the top of the right ribbon loop, and then pass through the loop formed by the left ribbon. 5. Put the ribbon ring on the left. Put the ribbon that passes through the circle formed by the left ribbon on the right and tighten it. 6. Trim both ends of the ribbon into a favorite shape, and the bow will complete the gift packaging method (2)-the knotting method of flipping the bow. This is a bow tie method that uses both sides and faces outward: 1. Tie the ribbon horizontally with the front facing outwards. 2. Fold the right side to the size of a petal. 3. Fold the petals from the left to the right. 4. As shown in the figure, the left and right sides are longer. Leave a hole in the middle. 5. The long side passes through the hole. 6. Arrange the left and right sides in the same size. 7. Cut the ribbon into appropriate length according to the size of the bow, and complete the gift packaging method (3)-the basic cross ribbon tying method. This is the most basic ribbon tying method.

When the position of the cross changes, the feelings expressed by the gift will also change. You can put ribbons on cards or small items to make changes and experience the fun in the base. The cross-shaped ribbon is simple and can set off the taste of the gift itself.

Cross system method 1. Prepare a ribbon, the length of which is 4 times of the total length+width+height of the box, which is the necessary length for bowing. 2. First leave the necessary bow length, and then make a circle vertically. 3. Turn it to the middle, cross two ribbons and make a circle horizontally. 4. As shown in the figure, first pass the ribbon to the left. 5. Pass the tape out from below. Simple and beautiful bow is a good gift packaging method (4)- Basic double diagonal ribbon tying method This is a very attractive ribbon tying method, which can show the taste of the giver. Except the simple cross double diagonal method 1. Prepare a ribbon, the length of which is three times the total length+width+height of the box.

Leave enough length to bow. 2. Place the ribbon obliquely as shown in the figure. 3. Pay attention to place the diagonal ribbon in parallel and then roll it up. Pass the ribbon on the left under the ribbon on the right. 5. Tie a beautiful bow. 6. In this way, the front and back sides can be made into two parallel diagonal ribbon gift packaging methods (5)-the basic V-shaped ribbon binding method gives people a very beautiful, clear and elegant feeling. When giving gifts to people, men or elders who love beauty, it will achieve a surprising effect. V-tie method 1. Prepare a ribbon four times the total length+width+height of the box. 2. Leave the necessary length for bowing, and draw a circle diagonally in the longitudinal direction as shown in the figure. 3. Make another circle obliquely in the longitudinal direction. 4. As shown in the figure, first pass the ribbon through the left side, and then fix it. 5. Put the ribbon out from below. Tie a knot and let the beautiful V-knot complete the gift packaging method (6)- basic sugar packaging method 1. Cut the wrapping paper around the box into +2~3 cm long and +3 cm wide, and put the bottom of the box in the center of the paper. 2. Fold the right paper inward along the box. Put the edge of the paper in the center of the box. 3. Fold the paper on the left inward. 4. Fix the overlapping parts of the paper with transparent adhesive or double-sided adhesive. 5. Fold both sides of the paper inward along the box. 6. Fold the paper into a beautiful trapezoid in sequence. 7. Gently mark the seams of the upper and lower folded paper. 8. Keep the mark parallel to the edge and fold the paper under it. 9. Fix the joint with double-sided tape or beautiful contract, and then wrap another bread. Turn to the front of the box and decorate it with ribbons or flowers to complete the gift packaging method (7)-the basic oblique packaging method of thin gift boxes, which is one of the most basic packaging methods.

Wrap the gift box with a certain angle of paper, and the corners can be wrapped beautifully in order. It will be very easy to wrap gifts after proficiency.

It is very useful to master this method. Inclined packaging method of thin gift box 1 Prepare the paper, as shown in the figure, and fold the paper inward along the edge of the box so that the corner of the paper is above the lid. 2. Then fold the paper at the back to the front to ensure that it can cover the whole box.

If the conditions of 1 and 2 cannot be met, the paper size does not meet the requirements. 3. Hold down the upper folding corner and fold the paper on the left side, and put the excess paper into the interior cleanly. 4. Fix the upper folding angle and the left folding angle with adhesive tape, fold the paper on the back or lift the box slowly. 5. Turn the box upside down while sorting out the extra paper. 6. The paper on the right can be folded inward like the paper on the left while keeping vertical. 7. Fold the remaining paper inward. Tidy up. Finally, fold the extra corners inward and fix them with double-sided adhesive tape, and then tie a ribbon on the box to complete the gift packaging method (8)-the basic oblique packaging method of thick gift boxes. In order to prevent the box from tilting, it is very convenient to wrap the thick box in this way.

Packaging method of thick gift box 1 Prepare a paper. First, as shown in the figure, turn the front of the box outward and fold the paper in front to cover the three corners. Second, as shown in the figure, fold the outer paper at the same position to confirm whether all three corners are covered, and the conditions of 1 and 2 must be met before proceeding. 3. Wrap the box with the paper in front, and stick the folding line tightly on the left and right corners of the box. Then put the box and wrapping paper outside. 5. Lift the paper on the right, fold it near the corner of the box, and then fold it outward near the corner of the box like the left, and fix the corner with adhesive tape.

Fold the excess paper inward and pack the front side. 6. Fold the paper below the right side inward to form a neat folding line, which is close to the corner of the box, so that the paper standing on the outside cannot be exposed on both sides. Fix it with tape, and then tidy the front. 7. Fold the outer paper to one side of the body, fold the excess paper inward along the edge of the box, and fix the edge with adhesive tape.

2. How to tie the rope on the gift box?

1. Tie a knot at both ends of the ribbon.

2. Hold the middle position with your hand and bend the silk on the right irregularly into a circle.

3. Fold the ribbon on the left side from the top and press it with the thumb of the right hand.

4. Pass through the right ribbon loop, and then pass through the loop formed by the left ribbon.

5. The original ribbon circle on the right is placed on the left, and the ribbon that passes through the circle formed by the left ribbon is tightened on the right.

6. Trim both ends of the ribbon into the desired shape, and the bow is finished.

Gift Packaging Method (2)-The Method of Bowing

This is a double-sided bow tie method:

1. Tie the ribbon horizontally with the front facing outwards.

2. Fold the right side to petal size.

The petals folded on the left are longer than those on the right.

4. Cross left and right as shown in the figure, leaving a hole in the middle.

5. The long side passes through the hole.

6. Arrange the left and right sides in the same size

7. Cut the ribbon to the appropriate length according to the size of the bow.

3. How to tie the gift box rope?

1. Prepare a ribbon, the length of which is 4 times of the total length+width+height of the box, which is the necessary length for bowing. 2. Leave the necessary bow length first, and then make a vertical circle. 3. Turn it to the middle part, rotate the two ribbons crosswise, and then rotate horizontally. 4. As shown in the figure, cross the original ribbon. 5. Tie the ribbon into a knot from below, and then tie it. 6. In this way, a simple and beautiful bow is finished. As shown in the figure below:

4. How to tie the rope on the surface of the gift box?

Information: Gift packaging method (1)-the basic method of bowing. Nothing, even if there is no wrapping paper or box, is not packed in a bag. As long as you tie a ribbon, it will become a gift at an incredible moment.

If you wear a beautiful bow, it will immediately add charm to the gift itself. Tie the bow: 1. Tie a knot at both ends of the ribbon. 2. Hold the middle position with your hand and bend the silk on the right irregularly into a circle. 3. Fold the ribbon on the left side from above and press it with the thumb of the right hand. 4. Go around the top of the right ribbon loop, and then pass through the loop formed by the left ribbon. 5. Put the ribbon ring on the left. Put the ribbon that passes through the circle formed by the left ribbon on the right and tighten it. 6. Trim both ends of the ribbon into a favorite shape, and the bow will complete the gift packaging method (2)-the knotting method of flipping the bow. This is a bow tie method that uses both sides and faces outward: 1. Tie the ribbon horizontally with the front facing outwards. 2. Fold the right side to the size of a petal. 3. Fold the petals from the left to the right. 4. As shown in the figure, the left and right sides are longer. Leave a hole in the middle. 5. The long side passes through the hole. 6. Arrange the left and right sides in the same size. 7. Cut the ribbon into appropriate length according to the size of the bow, and complete the gift packaging method (3)-the basic cross ribbon tying method. This is the most basic ribbon tying method.

When the position of the cross changes, the feelings expressed by the gift will also change. You can put ribbons on cards or small items to make changes and experience the fun in the base. The cross-shaped ribbon is simple and can set off the taste of the gift itself.

Cross system method 1. Prepare a ribbon, the length of which is 4 times of the total length+width+height of the box, which is the necessary length for bowing. 2. First leave the necessary bow length, and then make a circle vertically. 3. Turn it to the middle, cross two ribbons and make a circle horizontally. 4. As shown in the figure, first pass the ribbon to the left. 5. Pass the tape out from below. Simple and beautiful bow is a good gift packaging method (4)- Basic double diagonal ribbon tying method This is a very attractive ribbon tying method, which can show the taste of the giver. Except the simple cross double diagonal method 1. Prepare a ribbon, the length of which is three times the total length+width+height of the box.

Leave enough length to bow. 2. Place the ribbon obliquely as shown in the figure. 3. Pay attention to place the diagonal ribbon in parallel and then roll it up. Pass the ribbon on the left under the ribbon on the right. 5. Tie a beautiful bow. 6. In this way, the front and back sides can be made into two parallel diagonal ribbon gift packaging methods (5)-the basic V-shaped ribbon binding method gives people a very beautiful, clear and elegant feeling. When giving gifts to people, men or elders who love beauty, it will achieve a surprising effect. V-tie method 1. Prepare a ribbon four times the total length+width+height of the box. 2. Leave the necessary length for bowing, and draw a circle diagonally in the longitudinal direction as shown in the figure. 3. Make another circle obliquely in the longitudinal direction. 4. As shown in the figure, first pass the ribbon through the left side, and then fix it. 5. Put the ribbon out from below. Tie a knot and let the beautiful V-knot complete the gift packaging method (6)- basic sugar packaging method 1. Cut the wrapping paper around the box into +2~3 cm long and +3 cm wide, and put the bottom of the box in the center of the paper. 2. Fold the right paper inward along the box. Put the edge of the paper in the center of the box. 3. Fold the paper on the left inward. 4. Fix the overlapping parts of the paper with transparent adhesive or double-sided adhesive. 5. Fold both sides of the paper inward along the box. 6. Fold the paper into a beautiful trapezoid in sequence. 7. Gently mark the seams of the upper and lower folded paper. 8. Keep the mark parallel to the edge and fold the paper under it. 9. Fix the joint with double-sided tape or beautiful contract, and then wrap another bread. Turn to the front of the box and decorate it with ribbons or flowers to complete the gift packaging method (7)-the basic oblique packaging method of thin gift boxes, which is one of the most basic packaging methods.

Wrap the gift box with a certain angle of paper, and the corners can be wrapped beautifully in order. It will be very easy to wrap gifts after proficiency.

It is very useful to master this method. Inclined packaging method of thin gift box 1 Prepare the paper, as shown in the figure, and fold the paper inward along the edge of the box so that the corner of the paper is above the lid. 2. Then fold the paper at the back to the front to ensure that it can cover the whole box.

If the conditions of 1 and 2 cannot be met, the paper size does not meet the requirements. 3. Hold down the upper folding corner and fold the paper on the left side, and put the excess paper into the interior cleanly. 4. Fix the upper folding angle and the left folding angle with adhesive tape, fold the paper on the back or lift the box slowly. 5. Turn the box upside down while sorting out the extra paper. 6. The paper on the right can be folded inward like the paper on the left while keeping vertical. 7. Fold the remaining paper inward. Tidy up. Finally, fold the extra corners inward and fix them with double-sided adhesive tape, and then tie a ribbon on the box to complete the gift packaging method (8)-the basic oblique packaging method of thick gift boxes. In order to prevent the box from tilting, it is very convenient to wrap the thick box in this way.

Packaging method of thick gift box 1 Prepare a paper. First, as shown in the figure, turn the front of the box outward and fold the paper in front to cover the three corners. Second, as shown in the figure, fold the outer paper at the same position to confirm whether all three corners are covered, and the conditions of 1 and 2 must be met before proceeding. 3. Wrap the box with the paper in front, and stick the folding line tightly on the left and right corners of the box. Then put the box and wrapping paper outside. 5. Lift the paper on the right, fold it near the corner of the box, and then fold it outward near the corner of the box like the left, and fix the corner with adhesive tape.

Fold the excess paper inward and pack the front. 6. Fold the paper on the lower right side inward to form a neat folding line, close to the corner of the box, so that the paper erected on the outside can not be exposed to both sides, then fix it with adhesive tape, and then tidy up the front. 7. Fold the outer paper to one side of your body, fold the excess paper inward along the edge of the box, and fix the edge with adhesive tape. 8. Turn the box upside down and tie a ribbon or.

5. How to tie the wedding rope?

How to tie the bride's belt

If you wear a tie alone, you can tie a knot on your chest, then hold the knot in your right hand, hold the lower side of your back in your left hand, and carry it from the right side to your back.

1. Fold the waist width up and down and stick it on the waist, and take the knot length, which should be 20 cm.

2. Hang the knotted part on your shoulder and wrap the rest around your waist twice.

3. After two turns around the waist, the remaining belt is folded in half, and one end is hung on the shoulder and tied.

4. Keep your feet slightly apart to stabilize your body, and then tighten your belt.

5. Pick up the knotted part and fold it in half.

6. Tie a rope on your shoulder and fix the knot eye on the rope with a clip.

7. Flatten the folds of the winged part.

8. The length of the knot wing is shoulder width, and the front side is rolled up.

9. Pick up the knotted wings, put a pillow on the belt pad and roll it up.

10. Fold the knotted wings into beautiful folds and stick them on your back.

1 1. Open the knots and arrange them beautifully. When finished, do another inspection and adjust the angle of the wing.