Prompt information description
Make a mistake, make a mistake
System Suspend System Suspend.
Keyboard controller error Keyboard controller error
Keyboard error or no keyboard. Keyboard error or no keyboard.
BIOS ROM checksum error.
Single hard disk cable failure When the cable option is used for the hard disk, the installation position of the hard disk is incorrect.
FDD controller failure BIOS floppy disk controller error.
HDD controller failure BIOS hard disk controller error
Driver error.
Cache memory is damaged, do not enable cache. Cache is damaged and cannot be used.
Error: A20 line cannot be controlled Error: A20 address control line cannot be used.
Memory write/read failure Memory read and write failure.
Memory allocation error memory location error.
CMOS battery status is low. CMOS has failed.
Keyboard interface error Keyboard interface error
Hard disk drive failure Unable to load hard disk.
Hard disk doesn't exist. Hard disk doesn't exist.
Floppy disk failure (40) Floppy disk drive failed to load. Generally, the data cable is plugged in backwards, the power cord is not plugged in properly, and the CMOS built-in floppy drive is set incorrectly.
Cmos checksum error-default value loaded. CMOS checksum error, loading default (default) settings.
Second, after the BIOS refresh fails, a prompt message appears when the Bootblock starts.
Prompt information description
Detect floppy disk drive A media ... Detect floppy disk drive A format.
The medium of the drive is 1.44 MB1.2mb720 kb360k. The drive format is one of1.44mb, 12Mb, 720kb and 360kb.
Disk boot failed, inserting system disk and pressing Enter failed to boot. After inserting the system disk, press any key to continue.
Third, the MBR main boot zone prompt information
Prompt information description
Invalid partition table Invalid partition table.
Error loading operating system, unable to load boot system.
The operating system system boot file is missing.
Note: If unrecognizable characters appear in the hardware configuration list when the computer is started (that is, where Windows 98… is started during normal startup), it can be judged that the hard disk partition table is damaged at this time. If you have important data on your hard disk, don't partition it easily at this time. You can find a professional data recovery company.
Prompt information in DOS active partition
Prompt information description
Invalid system disk Invalid system disk.
Disk I/O error, replace the disk and press any key. Disk I/O error, press any key after replacing the disk (this prompt message appears when the C disk system file is lost or damaged. At this time, it may be SYS C: repair system files)
Invalid media type arriving at drive C: the media format description of drive C is invalid, that is, drive C is unformatted or the disk format of other operating systems, such as NTFS.
Invalid startup disk failed to start. Invalid startup disk failed to start.