The latest quotation of Little Swan Dehydrator Common faults and maintenance methods of Little Swan Dehydrator

Little Swan Dehydrator is a product under Little Swan brand with a long history. Although many washing machines have combined the functions of dehydration and laundry, some people still like to use simple dehydrators. As a post-80s generation, we are familiar with Little Swan Dehydrator. Want to know the latest quotation of cygnet dehydrator? When your cygnet dehydrator breaks down, how to fix it? Here is a brief introduction to the use, fault maintenance and price of Little Swan Dehydrator.

Correct use of cygnet dehydrator;

1. After washing, it is best to dehydrate for 0.5- 1 min before rinsing to remove washing liquid and dirt, so as to improve the rinsing effect and reduce the rinsing water consumption.

2. When the clothes are put into the dehydration barrel, put the clothes with large water absorption and thick texture on the bottom of the dehydration barrel, and put the thin clothes on it.

3. Don't put the clothes eccentrically to prevent the dehydration barrel from shaking due to eccentricity and knocking on the barrel wall.

4. The dehydration time should not be too long, and it is advisable to dehydrate within 2 minutes each time.

5. After the dehydration time, the outer cover of the dehydration barrel should be opened when the dehydration barrel stops rotating, and the force should not be too strong to avoid breaking the lid hinge.

6. For the washing machine with spray rinsing function, cover the clothes after putting them away, adjust the bleaching and dehydration timer to the required spray rinsing time, and then turn on the faucet; After washing (usually after 3-4 minutes), turn off the faucet, and then rotate the spray and dehydration timer counterclockwise for dehydration.

Common faults and maintenance methods of cygnet dehydrator;

The most common fault of cygnet dehydrator is that the motor vibrates and makes noise, which affects the normal rest. Then first check the motor of the dehydrator and remove the transmission mechanism (V-belt, etc.). ), and let the motor run at no load, and judge by hearing, vision and touch. It can be removed if necessary, and the motor can run independently. Motor is the power and noise source of dehydrator. The vibration of the motor is transmitted to the rotating system and box part of the washing machine through the transmission belt and the base, resulting in the noise of the washing machine. The low noise requirement for motors is essentially to reduce vibration and eliminate vibration sources.

The abnormal on-off of the contact of cygnet dehydrator is the concentrated expression of the failure of clockwork timer. The common causes of abnormal contact are: the contact pressure is insufficient due to the weakening of contact elasticity, so that the contacts can be counted or eliminated. Generally, needle-nosed pliers can clamp the static contact and bend to the moving contact; Contact burning and uneven pilling cause poor contact, so the contact should be polished; Due to the application of contact pieces, the contacts are not in contact; The contact piece is twisted and bent and cannot slide on the normal track; The plastic bracket on the contact piece cannot be supported due to thermal deformation, which leads to abnormal on-off of the contact. The cause of the above failure can be found by observation after removing the protective cover and turning the timing knob.

The timer stops or doesn't work, which may be caused by the poor manufacturing quality and assembly quality of parts, damaged gears, loose fixing screws of upper and lower clamping plates, deformation of balance wheels, eccentricity of escape wheels, etc. Timers with poor quality should be replaced. If you turn the timing knob, it feels very light, and it doesn't work after turning, then the spring is broken or unhooked. If you turn the timing knob, it will return soon. The reason may be that the friction between the head wheel and the friction plate is less than the spring torque, or the gear is damaged. For the pawl timer, it may also be that the pawl is not well engaged with the ratchet hole. For these faults, it is generally difficult to repair, and the timer should be replaced.

Latest quotation of cygnet dehydrator:

Little Swan Dehydrator 7 kg TT70-S 189 (large)

Latest quotation: 289.00

Little swan dehydrator 7.5kg TT75-S 189(L)

Latest quotation: 3 19.00

Little Swan Dehydrator 7.5kg stainless steel liner T75- 168

Latest quotation: 138.00

Little Swan Dehydrator 7.5kg stainless steel liner T75-858

Latest quotation: 168.00

Little Swan Dehydrator TT75-S 189(C)

Latest quotation: 329.00

Little Swan Dehydrator 7.2kg TA-3