The first stop of wire harness production is the wire opening process. The accuracy of wire opening process is directly related to the whole production progress. Once there is an error, especially the size of the thread opening is too short, it will lead to rework of all stations, which will be time-consuming and laborious and affect production efficiency.
The second station after wire opening is the crimping process. Determine the crimping parameters according to the terminal type required by the drawing, and formulate the crimping operation instruction. If there are special requirements, they should be indicated in the process documents and the operators should be trained.
Main uses of wire harness:
1, industrial wiring harness: mainly electronic wires, multi-core wires and flat cables with components in some cabinets, which are mostly used in industrial UPS, PLC, CP, frequency converters, monitoring, air conditioning, wind energy and other cabinets.
2. automotive wiring harness: The network main body of automobile circuit, also called low-voltage cable. Traditional automotive wiring harness products have the characteristics of heat resistance, oil resistance and cold resistance. At the same time, it is flexible. Used for automobile internal connection, which can adapt to high mechanical strength and high temperature environment.
3.LVDS Cable Company
In the telecommunication system, the devices directly used for communication between users are mostly full-utilization link systems with infinite load source loss, while the devices used to control the connection process of communication devices are mostly full-utilization systems with infinite load source waiting. When the number of load sources is not large relative to the capacity of the wire harness, a full utilization system or a partial utilization system with limited load sources is usually adopted.
Refer to the above? Baidu encyclopedia-wire harness