Make sure that your mobile phone can be connected to the computer with usb cable, and that your mobile phone has been unlocked.
Install the phone driver, which is installed on the computer.
Download the brush tool kit MiFlash, and put it on the computer to decompress it, which will be used later.
Download the line brush package and choose the corresponding ROM package according to your mobile phone model and version. Be sure to download the brush package, and don't download it wrong. It's best to download to the root directory of disk D, so that you can find it later. Download it and decompress it on the computer. It will be used later.
5.？ It is very important that the line brush will format all the data in the machine, so please make a backup before choosing carefully, such as contact information.
Two: Xiaomi 5 brush machine specific steps:
1.？ Unzip the downloaded brush package on the computer, as shown below, and then unzip it to a folder. This is very important and will be used later.
2.？ Install the brush tool, unzip the MiFlash toolkit downloaded above, and then directly find the file in exe format in the unzipped folder for installation until the installation is completed.
3.？ Next, the phone should enter the quick start mode. How to enter: When the phone is turned off, press and hold the volume button-and the power button. When an Android robot that Mi Tu is repairing appears on the screen, it has entered the quick start mode, as shown in the following figure:
4.？ Next, connect the computer with a data cable and wait for the computer to load the mobile phone driver. When the Android device is displayed in the device manager of the computer, the driver is normal.
5.？ Then open the newly installed machine brushing tool (MiFlash).
6.？ Then click the small arrow next to the browse button, select Advanced Settings, find the flash _ all _ except _ data _ storage.bat file in the rom folder of the line brush package just extracted, and then click OK.
7.？ Then click the "refresh" button, and then click the "brush machine" button to start brushing the telephone line. Generally, the progress bar has gone nearly half in the first few seconds. If you don't go, you may fail.
8.？ The brushing time varies from computer to computer, and generally does not exceed 200s s. After a while, the interface will display "Operation completed successfully", indicating that the brushing is successful and the mobile phone will automatically restart.