Audi a6 can use 2.0t Bluetooth to play music. Follow the following steps:
Select MMI to control TEL? Bluetooth option: use mobile phone Bluetooth, use MMI or mobile phone to search for nearby Bluetooth. The two conditions must be met first. , A6 must be equipped with MMI Bluetooth function, the mobile phone must be equipped with Bluetooth function, the engine must be connected within 15 minutes when the engine is on or off, or the driving range system must be connected. If there is no Bluetooth system, you need to install or add an instruction manual. Prerequisite: The car is stationary. And the ignition is turned off and the Bluetooth function MMI is turned on. See page 38 and the power bank performance is enabled. MMI is turned on. To connect the power bank, the Bluetooth device connection is not activated. Connect the power bank.
1) Select the button TEL (Electricity) > Connect cell phone (Connect cell phone) > Find new devices (Search for new Bluetooth devices). The MMI display will then display Use Bluetooth device or: Search for Bluetooth devices through mobile phone Function Find MMI
2) Display the Bluetooth device list, select and confirm the required mobile phone
3) Select and confirm Handsfree (hands-free) MMI to establish the connection PIN code
< p>4) Select and confirm Yes ()4) Your mobile phone enters the PIN code required to establish the connection or: Your mobile phone has displayed the PIN code. Please transfer your mobile phone to MMI to confirm the PIN code and the PIN code input limit. After about 30 seconds, please note that the mobile phone will appear and its system will ask whether it is necessary to connect automatically. According to the mobile phone, you must separately confirm the connection function of the mobile phone. The signal strength bar 13 Bluetooth symbol 12 shows the MMI display status line? Page 10 Figure 6. Self-loading MMI phone book for external mobile phone contacts. This process takes several minutes depending on the number of contacts.
Or directly connect to the mobile phone via Bluetooth for playback:
1. Turn on the Bluetooth function of the mobile phone and navigator respectively, set both devices to "visible to everyone", and search on the mobile phone After finding the Bluetooth device, select the connection. The password is: 0000. After the pairing is completed, the connection is successful.
2. After the navigation is successfully connected to the Bluetooth of the mobile phone, enter the dialing interface of the navigation system to make a call; enter the main interface of the navigation system to enter the Bluetooth interface, click Music, and open the music player of the mobile phone at the same time. Just click on the song on your phone to play.