First, draw a circle with a compass on the paper box, and then cut it out with a utility knife. At the same time, remember to cut a small circle in the middle, and use

2

Install the battery box

After the dial is made, the battery box only needs to be inserted from the hole on the back of the dial, and then fixed with screws on the front of the dial.

3

Making the body of the alarm clock

We all know that the alarm clock has an original body. Here is how to make the body. We can first cut a rectangle with a length equal to the circumference of the dial and a self-defined width. Then, edges are cut in the width direction of the rectangular piece of paper to make it easy to bend. Be careful not to cut too deep to avoid breaking. Then glue the edge of the dial with a hot glue gun, and bend the rectangle on the dial to make the body of the watch.

4

Making the back cover of the dial

This is very simple, just making a circle slightly smaller than the dial, which can be put into the body of the alarm clock. Besides, we can add a handle to it. Replace it with the cover of the water bottle

5

alarm clock body support

Next, we can make a pair of small feet and ears for the alarm clock. Little feet only need a small strip with the width of the body. And the small ears can be made into a half-moon shape. Then stick it on with a hot glue gun.

6

Digital production

Numbers are still drawn first, then cut off with a utility knife, and then glued to the dial in a fixed position with a glue gun. You can paint your favorite color if you have the heart.

7

The installation of watch hands

will be over soon, aren't you excited? Now you have to install the watch hand. Take out the prepared watch hands and install them in the order of hour hand, minute hand and second hand.