Now the sound insulation effect between walls is relatively good, which is what we require, because in this way the privacy of each family can be better protected. I still remember that in the past, when we visited other people's homes, we usually knocked on the door vigorously. In this way, although the owner of the room knew that a guest was coming, the knocking sound would inevitably affect the people next door. Neighbors cause trouble and affect their study or sleeping. Therefore, the application of products such as wireless video doorbells has been favored by families. We only need to press the wireless video doorbell lightly to transmit the sound into the room, and there will be no sound that will affect the neighbors next door. , and the sound emitted by the wireless video doorbell is relatively loud, so there is no need to worry that the owner of the room does not know that a guest is coming. Here I will introduce to you the installation knowledge of the doorbell product.

1. Wireless doorbell installation steps

1. Installation of wireless doorbell without batteries

The transmitter has been installed when this product leaves the factory After pairing with the receiver, plug the receiver into the socket at home and it can be used normally. Press the transmitter, the receiver indicator light flashes and music plays.

2. Electronic visual peephole installation

Step 1: As shown in the picture, install the screws to the outdoor unit depending on the thickness of the door.

Step 2: Insert the peephole lens through the door and U-clip from the outside.

Step 3:

a. Tighten the screws according to the thickness of the door.

b. Make sure the 4-pin wire has passed through the door and the tripods are fixed.

Step 4:

a. Connect the pins to the back of the socket on the indoor unit.

b. Then install the indoor unit to the tripod as shown in the picture.

2. Pay attention to the details of wireless doorbell installation

After introducing the installation method of wireless doorbell, let us learn about the installation precautions of wireless doorbell. . First of all, we pay attention to whether the wiring on the wireless doorbell is reasonable. The selected wireless video doorbell bubble must be of good quality. Whether it is the installation of a wireless doorbell speaker or a wireless doorbell button, it must be installed away from rainy places. As for the battery of the wireless video doorbell, it is necessary to choose a durable one to avoid the trouble of frequent battery replacement.

The above is the wireless doorbell installation method introduced to you. The installation of the wireless doorbell product is relatively simple. As long as the wiring of the purchased wireless doorbell product is reasonable, the installation is relatively simple. , it should be noted that when installing and using the wireless doorbell speakers and wireless doorbell buttons, be sure to avoid locations where they may come into contact with water, because if the wireless doorbell speakers and buttons come into contact with water, it will affect the used.