Click on the first "Video Cut" function among the multiple functions in the software, and then a small box will appear, select "Batch Video/Audio Splitter". Click the "Add" button in the interface, select multiple video materials that need to be cut from the computer, click "Open", and add as many videos as you want to cut. After adding the video, the left side shows all the videos you added. Because there are multiple videos, you need to select a video first. Under the preview window on the right, the left side of the timeline is where to set the starting interception point, and the right side is Set the location of the end interception point. The clip between the two interception points is the part you want to intercept and save. You can also enter the exact time to be cut in the start and end boxes. Perform the same operation, select the next video, and set the start and end interception point positions.

However, cutting audio in batches is the same operation. Add multiple audios to be cut, and then select an audio first. In the preview window on the right, the left side of the timeline is where to set the starting interception point. , the one on the right is the position where the end interception point is set. The clip between the two interception points is the part you want to intercept and save. You can also enter the exact time to be cut in the start and end boxes. Perform the same operation, then select the next audio, and then set the start and end interception point positions. Click the "Start" button to output.