Current location - Music Encyclopedia - QQ Music - What to do if the car audio amplifier is broken?
What to do if the car audio amplifier is broken?

When driving, enjoy the joy and passion brought by the car audio system, so that you will be more energetic and focused when driving. The car audio system will definitely become the best companion to accompany you through the boring time when you are bored driving. However, it often becomes a blind spot when cleaning your car. In fact, the car audio system also needs our careful care. Let me give you some tips for cleaning your car audio system to improve the quality of your trip.

Moisture-proof, dust-proof, shock-proof

Car audio, like other electrical products, cannot withstand moisture, dust and severe vibration. Some car owners like to turn the audio volume to maximum when driving long distances. Loud music can drive away fatigue. However, car audio is most afraid of this sudden amplitude change.

When using a sound system, be sure to avoid turning the volume to the maximum, as this can easily damage the speaker coil and affect the power amplifier. If the amplitude suddenly increases, the power amplifier may burn out. So in addition to avoiding sudden amplitude changes. Humidity and dust are also two major issues that cause sound to fail. When cleaning the interior of the car, car owners must be careful not to spray perfume, detergent and other liquids in the direction of the stereo. Dust on the speaker can be wiped with a dry towel or a special wet tissue. After cleaning the interior of the car, it is best to open the windows for a while to allow the moisture to evaporate before closing them.

Routine maintenance is very important.

The laser head of the CD player is a wearing part and requires maintenance. Car owners can often use wet cotton swabs to wipe the CD slot of the CD player and the panel of the audio system. In addition to ensuring the cleanliness of the host, dust on tapes and CDs will also affect the playback sound quality and damage the sound. When the disc laser head is running at high speed, if it encounters dust and deviates from the track, the sound quality will be distorted and the laser head will be damaged.

Due to environmental factors, it is generally difficult for car audio to achieve the same effect as home audio. Car owners should also be more careful during daily use. If the car audio often fails to read the disk, it means there is dust on the laser head. The owner can clean it himself. Wipe the CD with a special CD cleaner, then put the CD into the CD player to clean the dust on the laser head. When car owners use stereos, it is best not to change CDs frequently and try to handle them gently when placing CDs.

The above is an introduction to the cleaning and maintenance methods of car audio systems. Hope it helps.