Nowadays, people are buying more and more electronic devices. In the past, it was not very convenient for us to listen to music and watch TV, but now, whether it is a computer, mobile phone, or tablet, we can listen to the songs we want to listen to anytime, anywhere. If you especially like listening to music and have high requirements for sound quality, you can install a speaker at home. If you want to use the speaker, the correct method of installing the speaker socket is also very important. Let me introduce you to a speaker socket installer. method.
1. Correct cable selection method
When selecting cables, the home theater speakers are mainly used for watching movies. For playing movies, there are not many requirements. You can choose two hundred core copper wires. When wiring, the situation in each house is different, so the wiring should be based on the actual situation. If it is front left, front and right surround speakers, Then it is best to place it on the side of the short wall, so that the effect can be better.
2. Audio socket installation and wiring method
When installing an audio socket, you need to use a speaker cable. It requires about 1.5 square meters to 2 square meters. The left side of the amplifier is connected to the left audio. The right side is connected to the right speaker, the red wire is connected to the red wire, and the black wire is connected to the black wire, that is, positive is connected to positive and negative is connected to negative. This is the correct wiring method.
3. Misunderstandings about installing audio sockets
When many people install audio sockets, they think that installing the socket too high will affect the aesthetics, so they install the socket at a relatively high level. It is very bad to do this in a private place. If the installation is too low, the socket may be touched when cleaning. If water splashes on the socket, it will also cause leakage, so clearly It is best to install the socket about 1.8 meters from the ground. If concealed installation is used, it should not be lower than 0.3 meters. When installing audio sockets, you should also be careful not to install them randomly. The power wires must use copper wire cross-sections. If you live in an old house, you should replace all the previous aluminum wires with copper wires, because aluminum wires are special Easily oxidized and prone to fire accidents.
IV. Audio wiring methods
Generally, the installation and wiring of a single audio socket can be divided into two different situations, one is theater wiring, and the other is hifi cable, hifi audio Wires are very expensive, so if you want to save money, try to shorten the length of the wires, which can also reduce losses. There is one on the left and right sides of the speaker, so you don’t need to wire them during decoration, just use open wires. However, the wiring of a home theater will be more complicated and there will be more speakers. If it is not arranged properly, it will become messy and very uncomfortable to watch.