2.FM transmission is turned off by default. If you need FM wireless connection to speakers or cars, you can press and hold the "FM FM" button to turn on FM transmission.
3. The sensitivity of the microphone can be adjusted independently. Press the "Studio" or "Folk Song" operation key for a long time to enter the microphone sensitivity adjustment setting (parameter -1). If you like to sing with your mouth close to the microphone, the sensitivity can be adjusted lower, and the sensitivity can be adjusted higher.
4. When using the microphone to record videos of singing bars or national karaoke songs, it is recommended to use headphones for monitoring, instead of using the speaker that comes with it for external monitoring, because the sound from the speaker will re-enter the microphone head, which will affect the recording effect. You can turn off or turn on the microphone speaker independently by pressing and holding the "Cancel the original sound" key.
5.； The sound input of the microphone head can be turned off separately. Press the "Listen to the Song" button briefly to turn off the sound input of the microphone head. When you put down the microphone conveniently, you can press the "Listen to the Song" button conveniently to turn off the sound input of the microphone head, so as not to cause the sound vibration and the howling interference of the horn.
6. The microphone battery adopts the ultra-high 26 mA battery specially supplied by Charming Bird, and the charging head should be 5V2A as far as possible. The charging time of 1A will be relatively long, and that of 2A will only take 4-6 hours. It will be protected by the battery all the time, and there will be no problem. The battery can be replaced and disassembled, but please be sure not to use the battery purchased separately outside at any time to avoid damaging the microphone. Please buy original batteries from regular channels.
7. The white small artifact that comes with it at the bottom enters the channel selection function after long press of the switch, and then you can switch channels by short press of the on key, or you can press and hold the switch for a long time when the small artifact is turned on, at this time, the color of the indicator light will change, indicating that it has entered the adjustment mode of the output volume of the small artifact, with the position of 87.5 indicator light indicating the minimum output volume and the position of 17.9 indicator light indicating the maximum output volume.
8. After Bluetooth is connected to the microphone, if you just listen to songs through the microphone speaker, please click the "Listen to Songs" button to turn off the sound input of the microphone head. If you need to switch, you can also switch songs directly through "Previous Song" and "Next Song" on the microphone.
9. When the small artifact is broadcasting live or shooting vibrato audio and video, the small artifact is inserted into the earphone hole of the mobile phone for broadcasting live or shooting, and then another mobile phone can be found, and the Bluetooth is connected with the microphone to provide accompaniment, so that music and human voice come out through its own speaker at the same time, thus realizing monitoring;
1. If the small artifact is connected to a stereo without radio function, don't plug the pin directly into the audio input of the stereo. You can output a 3.5 audio header through its own patch cord, and then find an audio cable to connect the stereo.