Fei Zigan Xian Zhi Dou Shen Zhi You Wu Xuan Pi Babble Jian Ye Dong Translator Gan Deng Weng

The memory cannot be read or written numerical description

0 0x0000 Job completed.

1 0x0001 Incorrect function.

2 0x0002 The system cannot find the specified file.

3 0x0003 The system cannot find the specified path.

4 0x0004 The system cannot open the file.

5 0x0005 Access denied.

6 0x0006 Invalid code.

7 0x0007 The storage control block is destroyed.

8 0x0008 There is insufficient storage space to process this command.

9 0x0009 The storage control block address is invalid.

10 0x000a The environment is incorrect.

11 0x000b An attempt was made to load a malformed program.

12 0x000c Access code error.

13 0x000d Data error.

14 0x000e There is insufficient storage space to complete this operation.

15 0x000f The system cannot find the specified disk drive.

16 0x0010 Unable to remove directory.

17 0x0011 The system cannot move the file to another drive.

18 0x0012 No files.

19 0x0013 The storage medium is write-protected.

20 0x0014 The system cannot find the specified device.

21 0x0015 The device is not ready yet.

22 0x0016 The device cannot recognize the command.

23 0x0017 Data error (cyclic redundancy check)

24 0x0018 The program issued a command with the wrong length.

25 0x0019 The disk drive cannot find the fixed sector or track on the disk.

26 0x001a The specified disk or disk cannot be accessed.

27 0x001b The disk drive cannot find the required sector.

28 0x001c The printer is out of paper.

29 0x001d The system cannot write data to the specified disk drive.

30 0x001e The system cannot read the specified device.

31 0x001f A device connected to the system is not functioning.

32 0x0020 the process cannot access the file because it is being used by another process.

33 0x0021 Part of the file is locked and cannot be accessed now.

34 0x0022 The disk drive disk is incorrect. Please insert %2 (volume serial number: %3) into drive %1.

36 0x0024 There are too many open shared files.

38 0x0026 End of file reached.

39 0x0027 The disk is full.

50 0x0032 This network requirement is not supported.

51 0x0033 The remote computer cannot be used.

52 0x0034 The network name is duplicated.

53 0x0035 The network path cannot be found.

54 0x0036 The network is busy.

55 0x0037 the specified network resource or device is no longer available.

56 0x0038 the network bios command limit has been reached.

57 0x0039 Network configuration There was a problem receiving the card.

58 0x003a The specified server cannot perform the requested operation.

59 0x003b An unexpected network error occurred.

60 0x003c The remote adapter card is incompatible.

61 0x003d The printer queue is full.

62 0x003e The server has insufficient space to store files waiting to be printed.

63 0x003f The file waiting to be printed has been deleted.

64 0x0040 The specified network name cannot be used.

65 0x0041 Network access denied.

66 0x0042 The network resource type is wrong.

67 0x0043 The network name cannot be found.

68 0x0044 The name limit of the regional computer network adapter card is exceeded.

69 0x0045 Network bios session limit exceeded.

70 0x0046 The remote server has been suspended or is starting.

71 0x0047 No more connections can be made to this remote computer at this time because the number of connections has reached the upper limit.

72 0x0048 The specified printer or disk device has been suspended.

80 0x0050 The file already exists.

82 0x0052 Unable to create directory or file.

83 0x0053 int 24 failed

84 0x0054 The storage to handle this request cannot be used.

85 0x0055 The local device name is already in use.

86 0x0056 The specified network password is incorrect.

87 0x0057 Parameter error.

88 0x0058 A data writing error occurred on the network.

89 0x0059 The system cannot execute other trips at this time.

100 0x0064 Unable to establish other system semaphore.

101 0x0065 belongs to the semaphore dedicated to other trips.

102 0x0066 The semaphore has been set and cannot be closed.

103 0x0067 Unable to specify semaphore.

104 0x0068 Unable to request dedicated semaphore at break time.

105 0x0069 The previous ownership of this semaphore has ended.

106 0x006a Please insert the disk into %1.

107 0x006b The program has stopped because the substitute disk has not been inserted.

108 0x006c The disk is in use or locked.

109 0x006d pipe has been aborted.

110 0x006e The system cannot open the specified device or file.

111 0x006f The file name is too long.

112 0x0070 Insufficient disk space.

113 0x0071 No internal file identifier available.

114 0x0072 The target internal file identifier is incorrect.

117 0x0075 The ioctl call performed by the application is incorrect.

118 0x0076 The write verification parameter value is incorrect.

119 0x0077 The system does not support the requested command.

120 0x0078 This function is only valid in win32 mode.

121 0x0079 semaphore timeout period exceeded.

122 0x007a The data area passed to the system call is too small.

123 0x007b Syntax error in file name, directory name or storage label.

124 0x007c The system call level is incorrect.

125 0x007d The disk has no label set.

126 0x007e The specified module cannot be found.

127 0x007f The specified program cannot be found.

128 0x0080 There are no sub-trips to wait for.

129 0x0081 %1 This application cannot be executed in win32 mode.

130 0x0082 attempt to use a file handle to an open disk partition for an

operation other than raw disk i/o.

131 0x0083 attempt to use the file The indicator moves before the beginning of the archive.

132 0x0084 Unable to set file index on the specified device or file.

133 0x0085 The join or subst command cannot be used with a drive that has been previously joined.

134 0x0086 Try to use the join or subst command on the disk drive that has been combined.

135 0x0087 Try to use the join or subst command on the replaced disk drive.

136 0x0088 The system attempts to delete the link relationship of an unlinked disk.

137 0x0089 The system attempts to delete the replacement relationship of the disk drive that has not been replaced.

138 0x008a The system attempts to combine the disk drive to the directory of the drive that has already been combined.

139 0x008b The system attempts to replace the disk drive with the directory of the disk drive that has been replaced.

140 0x008c The system attempts to replace the disk drive with the directory of the disk drive that has been replaced.

141 0x008d The system attempted to subst the drive into a combined drive directory.

142 0x008e The system cannot execute join or subst at this time.

143 0x008f The system cannot combine disk drives or replace directories under the same disk drive.

144 0x0090 This directory is not a subdirectory of the root directory.

145 0x0091 The directory still has data.

146 0x0092 The specified path has been replaced.

147 0x0093 Insufficient resources to process this command.

148 0x0094 The specified path cannot be used at this time.

149 0x0095 The disk drive directory trying to be combined or replaced is an already replaced target.

150 0x0096 The config.sys file does not specify system tracking information, or the tracking function is canceled.

151 0x0097 The number of specified semaphore event dosmuxsemwait is incorrect.

152 0x0098 dosmuxsemwait is not executed; too many semaphore are set.

153 0x0099 dosmuxsemwait list is incorrect.

154 0x009a The storage media identifier you entered has a length limit.

155 0x009b Unable to create other execution threads.

156 0x009c The receiving trip refused to accept the signal.

157 0x009d The section has been abandoned and cannot be locked.

158 0x009e The section has been unlocked.

159 0x009f The address of the thread identifier is incorrect.

160 0x00a0 The argument string passed to dosexecpgm is incorrect.

161 0x00a1 The specified path is incorrect.

162 0x00a2 signal is waiting for processing.

164 0x00a4 The system cannot create an execution thread.

167 0x00a7 Unable to lock part of the file.

170 0x00aa The requested resource is in use.

173 0x00ad The lock requirement for canceling the range is not obvious.

174 0x00ae The file system does not support automatic change of lock type.

180 0x00b4 The system found an incorrect section number.

182 0x00b6 The operating system cannot execute %1.

183 0x00b7 The file already exists and the same file cannot be created.

186 0x00ba The transmitted flag is incorrect.

187 0x00bb The specified system flag cannot be found.

188 0x00bc The operating system cannot execute %1.

189 0x00bd The operating system cannot execute %1.

190 0x00be The operating system cannot execute %1.

191 0x00bf Unable to execute %1 in win32 mode.

192 0x00c0 The operating system cannot execute %1.

193 0x00c1 %1 is not a correct win32 application.

194 0x00c2 The operating system cannot execute %1.

195 0x00c3 The operating system cannot execute %1.

196 0x00c4 The operating system cannot execute this application.

197 0x00c5 The operating system is currently unable to execute this application.

198 0x00c6 The operating system cannot execute %1.

199 0x00c7 The operating system cannot execute this application.

200 0x00c8 The section of code cannot be larger than or equal to 64kb.

201 0x00c9 The operating system cannot execute %1.

202 0x00ca The operating system cannot execute %1.

203 0x00cb The system cannot find the entered environment option. \r

205 0x00cd There is no signal sub-processor for any process in the command subdirectory.

206 0x00ce The file name or file extension is too long.

207 0x00cf ring 2 stack is in use.

1. The possibility of hardware is relatively small. If it is hardware, it should be caused by the incompatibility of the memory module with the host. If the hardware reason can be ruled out (the memory module is not compatible, replace it memory), look down:

2. If it is caused by the system or other software, it can be solved by the following methods: If there is a problem with the system itself, install the official patch in time, and reinstall the system if necessary. Virus Issues: Antivirus. Antivirus software conflicts with other software: Uninstall the problematic software. Are the graphics card and sound card drivers installed correctly or have they been maliciously overwritten? Reinstall the graphics card and sound card driver.

1. Use the sfc command that comes with the system to repair the damaged system files and restore them to normal status.

Start → Run → Enter cmd to open the "Command Prompt" window → Enter the string command sfc/scannow → Enter → Wait patiently for the command program to search and scan each system file → Once the system file is found The version is incorrect or the system file is damaged → it will automatically pop up a prompt interface → ask to insert the Windows system installation CD → extract normal system files from it to replace the abnormal system files → achieve the purpose of repairing the system files → finally restart the computer .

2. The installed Domino program causes problems. You can start → run → msconfig → start the project → close the Domino startup item → if it cannot be closed → you can use system settings such as Kaka Assistant The software forcibly shuts it down → if it still doesn’t work → it proves that your system is poisoned → then reinstall the system to completely solve the problem.

3. The browser displays a prompt that the memory cannot be read or written:

1. Run → regedit → enter the registry, and go to →

HKEY_LOCAL_MACHINE\SOFTWARE\ Microsoft\Windows\CurrentVersion\Explorer\ShellExecuteHooks

This location has a normal key value {AEB6717E-7E19-11d0-97EE-00C04FD91972}, delete the others.

2. Open the CMD window and enter the following command:

for %i in (%windir%\system32\*.dll) do regsvr32.exe /s %i Enter

for %i in (%windir%\system32\*.ocx) do regsvr32.exe /s %i press Enter

Restart the machine after the two operations are completed.

Four. If the above method cannot solve the problem, you can only use the last resort:

Completely register the dll: Open "Run" and enter → cmd → Enter

Then Copy the following line of characters into the black cmd box, press Enter, wait for all the dll files to be registered, and then close them. To prevent input errors, you can copy this command, then right-click the mouse after the command prompt → Paste → Enter. Wait patiently until the screen stops scrolling.

(The following is the code to be run):

for %1 in (%windir%\system32\*.dll) do regsvr32.exe /s %1

Restart the machine when finished.

5. If NET.Framework, a Microsoft component service, exists in your computer and you do not use it → then uninstalling this service may solve the problem: Start → Settings → Control Panel → Add and Remove Programs → NET .Framework→Delete (if you must use it, restart your computer and install NET.Framework again).

6. Close this report (treating the symptoms but not the root cause):

1. Right-click "My Computer" on the desktop → Properties → Advanced → Error Report → Error Report → Check " Disable error reporting" → "But notify me when serious errors occur" checkbox → OK. In this way, Windows XP will not pop up error prompts for some minor errors.

2. If that doesn’t work, shut down the error reporting service completely. Start → Enter during operation → services.msc → Open the "Services" window → Find "Error Reporting Service" → Open the "Properties of Error Reporting Service" dialog box → Change the "Startup Type" to "Disabled" → Restart after confirmation system.

The simple and effective solution is to read the error message and uninstall the software that caused the conflict. After restarting the machine, first close the anti-virus software and re-run the installation.