The noise in the computer stereo is not a big deal, but it makes us uncomfortable when using the computer. What caused it? How should we solve it? Let's introduce it in detail for everyone!

the reason for the noise in the computer stereo

1. Check whether the cable at the back is loose, plug the connector again, turn on the stereo to listen to the sound, and try to put the connector where there is no noise! It is possible that the line was kicked or tripped and the interface was loose.

2. Is there any interference near the stereo? Are there any appliances or mobile phones that you don't usually have? Just take them away.

3. Before the noise, did you listen to music with the stereo turned up very loudly? If there is, it may be a problem with the speaker. Use headphones to hear if there is any problem. If not, it is a sound problem, otherwise there is something wrong with the main sound card of the computer.

what should I do if the computer is noisy?

Method 1: First, check to see if some external environment around is good and the wiring is in good condition.

method 2: check whether there is something wrong with the sound card driver of the computer, and you can reinstall it.

method 3: whether to plug the audio into the computer before turning on the computer, because the current when turning on the computer is large, which easily affects the vibration film of the audio, so it is best to connect the computer after turning on the computer.

method 4: adjust the volume control on the computer. Turn up the mixing volume of the microphone to 8-9%.

Method 5: Check whether there are inappropriate programs installed in the computer, and check whether the host accessories of the computer are loose.

method 6: check the stereo when it is put inside. if there is any problem, go to the repair shop to repair the stereo.

how to adjust the sound channel of the computer

1. Click the speaker icon in the lower right corner of the computer, select the volume control, and adjust all waveform adjustments. Generally adjust to the middle.

2. You can also click "Console", select "Hardware and Sound Control" and select Adjustment.

3. Of course, you should pay attention to the adjustment of the volume balance button on the stereo, which is usually set to the middle.

the solution to the noise in the computer stereo

the problem with the microphone

is the microphone mixed to the maximum? Microphone, the mixing volume can be increased to 8 to 9%. Strengthen and remove the microphone. Because some sound cards don't support it. Is there a problem with the connection between your microphone and the computer host? Disconnect the microphone from the computer host, then reconnect it correctly, and check for poor contact.

is there any leakage

is there any leakage on your computer motherboard? Use a wire to expose the metal strips at both ends of the wire, and connect one end to the unimportant metal part outside the computer host. Head to the ground. Special attention: Never choose a key part for wiring outside the computer host, and pay attention to the safety of you and your computer.

computer problems

if your computer has problems, such as cleaning up junk files, removing viruses and trojans, there will also be abnormal sounds. Network congestion and slow network speed can also cause abnormal sound. Do a good job in computer maintenance. It should be easy to hear the sound of insufficient network speed. You can ask the online management to help you judge it in the theme area of Novice Park.

that's all about how to deal with the noise in the computer stereo. I believe everyone knows about it, and I hope it will help you.