1. Check the machine
When you get a repeater, before using it, check whether the accessories are complete and whether each component can work normally, and then start using it after ensuring that there are no problems.
2. Familiar with functional components
Generally, there are four keys and a small hole above the host, namely, stop key, tape fast forward key, tape fast backward key, tape playback key and built-in microphone. On both sides are jacks and volume adjustment buttons. The jacks are wired, earphone, external power supply and USB respectively. Then, what we often use is all in the front. The tape warehouse is used to store tapes. There are some function keys below, such as basic keys such as play, record, previous song, next song, repeat, pause, contrast and speed change. There is also an LCD screen that will show the current working status of the repeater. Understand the basic functional components, you can use the specific operation.
3. Setting the time
When stopping playing, press and hold the Pause key to enter the time mode, and then press and hold the Repeat key to enter the time setting page. At this time, the LCD screen will flash the hour part first, and press the previous song or the next song to change the value of the hour. After adjusting the hour, the minutes and seconds will be adjusted as the hour. After adjusting the time, press the repeat key to indicate confirmation, and then automatically exit the setting interface after holding for 1 seconds.
4. Operating the machine
As long as the tape is inserted, the repeater can play the tape content, so it can be used normally only by mastering the repeater method. There are three basic methods of repeating: manual repeating, one-breath repeating and automatic repeating.
Manual repeat is to insert a tape or USB card, press the playback key, select the starting point of repeat, and then press the repeat key to finish the content repeat from the previous point to the starting point. If you want to follow and compare, you can press the follow-up key to enter your own voice first, and then press the comparison key to compare.
One-breath repeat is to enter the automatic state when the speed is changed, so you can repeat it in one breath. Automatic repeat requires a long press of the shift key to change the manual state to the automatic state before automatic repeat. If you follow and compare automatically, it is actually similar to the manual operation of following and comparing.
how to record with a repeater
Repeater can be a digital repeater or a tape repeater. Digital repeater can record by pressing and holding the record key in USB mode after inserting a USB card. Press and hold it again to exit the recording state, and the play key can hear what has just been recorded.
Tape recording is rather troublesome. Before recording with a tape repeater, make sure whether your tape is recordable. You can judge by looking at the two square holes at the bottom of the tape. If it is closed, it can be recorded. If it is not closed, it can be taped to seal the square hole, and then it can be recorded. When recording, first put the tape into the repeater. If your repeater is not electrically controlled, you need to press the play key and the record key at the same time to record. If it is an electronically controlled repeater, slide the recording lock key to the recordable state, put the tape in, then press and hold the playback key for about 2 seconds, and then you can record after seeing the LCD screen display (rec).
Repeater can record in two ways, one is built-in microphone, and the other is external microphone. When using earphone microphone (external) to record, the microphone cable must be plugged into the machine microphone interface, and the built-in microphone is invalid at this time, which means that the two recording methods cannot be carried out at the same time.
What should you pay attention to when using the repeater
1. Before using the repeater, you should read the Instruction Manual carefully and be familiar with the relevant terms, names and usage of the function keys before operating, so that the excellent performance of the repeater can be fully exerted.
2. Use a dedicated adapter for DC current, because different DC power supplies have different electrical performance parameters, which will affect the use effect and even damage the machine.
3. When installing the battery, don't reverse the polarity, don't use the battery with insufficient power, and replace the battery with insufficient power in time to avoid the leakage of battery solvent and damage to the machine.
4. When fast-forwarding and fast-rewinding the magnetic tape, you must press the stop button immediately after fast-forwarding and fast-rewinding the magnetic tape, so as not to damage the movement and circuit, because this movement has no automatic stop function during fast-forwarding and fast-rewinding.
5. The follow-up time should not exceed the maximum repeat time of the repeater, so as not to cover the previous sound.
6. The repeater has a precise structure. Do not place it in an environment that is too cold, too hot or humid, and do not disassemble it or throw it again at will.
7. Do not use moldy and damp tapes, so as not to affect the use and damage the machine.
8. It is not recommended to use a 9-minute tape, because the tape base is too thin and it is easy to twist the tape.
9. Don't use ordinary batteries for charging, so as not to damage the machine by leaking solution from the battery.
1, often use special cleaning agent to clean the magnetic head and pinch roller to remove dirt on the magnetic head pinch roller, so as not to affect the use effect.
11, do not use organic solvents to clean the fuselage, so as not to corrode the fuselage.