1. First open the music player interface, find the menu bar at the top of the music player, and click? Settings? Function icon.
2. In the pop-up function menu bar, select? Settings? Options.
3. After selecting the setting option, the basic setting function menu window will pop up. Select under advanced settings? Sound effect settings? Function options of.
4. choose? Sound effect settings? After the function option, click? In the function details on the right. Set the equalizer? Button.
5. click? On the right side of the equalizer window. Reset? Or? Adjust decibels? . Through the above steps, the setting of the 10 equalizer subwoofer is completed.
Active electronic frequency division selects the frequency division point and attenuation slope of each horn unit. Its calibration core is to make each horn work in a linear state, there are no sharp peaks and valleys near the intersection and within the working bandwidth, and the frequency response of the horn is linear and straight.
Delay is to make each speaker reach the ear at the same time without phase difference, and each speaker of the system reaches linear phase without time difference; The phase difference is easy to cause sharp peaks and valleys near the frequency division point, and zero phase difference can achieve the best linear response. EQ equalization is to modify timbre; Please note here that EQ can't solve the structural problem, that is to say, your sound system can't solve the standing wave caused by the installation or the acoustic environment in the car, but it can improve your listening sense and modify your timbre. According to the characteristics of car stereos, people in Andhadhun of silver moon Fax summarized the following EQ adjustment methods. Each car audio refit Andhadhun or car audio player can try to adjust its own audio system. But before adjusting, remember that EQ is MSG. Don't add too much tone to the main course, it will affect the system itself. The better the equipment, the better the modification.
Additional audio music fax DSP tuning interface
1, the EQ equalizer affects the built-in EQ equalizer of DSP in the market. There are usually 10 eq and 3 1 eq, where 3 1 is one-third octave. Adjust the main frequency point of 3 1. Here we will briefly introduce the frequency range, so that everyone has a corresponding hearing and frequency.
Subwoofer: 20Hz-60Hz. In car audio, if this frequency band is adjusted too much, the sound will be seriously tailed, and the hearing will be uncontrollable and turbid. If it is too little, the sound will be ethereal and rootless. Excessive ascension will make music turbid. At the right time, the voice is lingering and rich. Mainly thunder, bass drum, organ, bass and other sounds.
(Photo/Text/Photo: Pacific Auto Network Q&A called Beast)