Click. Here you are. Inches.
-
-
-
-
-
Management method:
1, battery failure: If the time to enter the BIOS main interface system is wrong, it means that the motherboard battery is invalid, causing the computer to call CMOS default parameters. If it is inconsistent with the local hardware environment, the computer will not start normally. You can purchase the motherboard battery for replacement, and then press DEL (press F2 for notebook or other designated hotkeys) to enter the CMOS interface and reset the correct parameters. Finally, press F 10 to save, exit and restart.
2. Configuration error: This may also be because the manually configured CMOS parameters are inconsistent with the local hardware environment. In general, you can press F 1 to skip non-fatal errors, and start the computer directly according to the prompt information in black and white, or press DEL to enter CMOS, and then press F9 to Load predefined parameters or select load.
Optimized
Default value (load high performance default value) or load.
Automatic fail-safe
Default value (load fail-safe default value), and then press F 10 to save and exit the restart.
3. Hardware failure: If the above operations are invalid, it means that there is something wrong with the hardware, generally, the memory is in poor contact with the hard disk or the master boot record of the hard disk is damaged, so it is necessary to plug and unplug the memory or hard disk again, or repair the master boot record of the hard disk or reinstall the system or replace the hard disk.