(2) Whether the steering angle is accurate. The normal rotation angle is 90 degrees, except for special design factors.
(3) Whether the spelling is rigorous and accurate. The correct solid wood composite floor should be seamless or keep a uniform distance.
(4) whether the radian and roundness are smooth and smooth. In addition to a single one, multiple identical shapes should also ensure the consistency of shapes.
(5) Whether the cupboard door switch is normal. When the cupboard door is opened, the operation should be light and there is no abnormal sound.
(6) There should be no gap in the fixed cabinet wall.
(7) The woodworking project is damaged. The surface of woodworking engineering should be smooth, free from bulging and damage.
(8) Symmetrical woodworking projects are symmetrical.
(9) Whether the nail hole of the decorative plate has been repaired. Of course, this is a painter's job, but because it exists in woodworking projects, I will mention it here.
(10) Whether the corner joint of ceiling is smooth, and whether there is obvious dislocation and deformation.
(1 1) Whether the grounding wire is installed straight and the ground is accurate.
(12) Whether the ceilings of bathrooms and kitchens such as aluminum gusset plates and PVC gusset plates are flat and free from deformation.
(13) Whether the lock of cupboard door handle is installed correctly and opened normally.
(14) Whether the bedroom doors and other doors are opened normally. When closing the door, the upper, left and right gaps should be tight, and the gap of the lower door should be moderate, generally 0.5cm is better.
The above is for reference only.