What are the things to note when making friends?
6 things to note when making friends:
1. Always be wary of strangers and don’t be gullible.
Sometimes intuition will deceive a person. Try to communicate as much as possible to fully understand the other person.
Second, choosing the right date time and place is the best protection for yourself.
Choose a suitable appointment time. Try not to choose nights, daytime hours on weekends are a good choice. If you really have no choice but to go on a date in the evening, you must control the time and don't delay it too late. If it is really suitable, there will be a long time to come, so don’t waste yourself too late. At no time should you force yourself to do something that makes you uncomfortable. Choose a suitable date location. Please determine a first principle before you date: choose a public place to date, and inform your friends or family. You must have heard the advice many times about how dangerous it is to go out alone to a strange, secluded place and date a stranger. Especially for girls, choosing a public place that they are familiar with, such as near school, is the best choice. Do not go to its premises or any potentially dangerous place without fully understanding it. At no time should you force yourself to do something that makes you uncomfortable.
3. Observe a person’s words and expressions when dating
You cannot know a person’s real background or true personality through the Internet, so observing their words and expressions during a date is a good time to deepen your perceptual understanding of the other person. . Observe any characteristics of the other party at any time: bragging, sighing, excessive behavior, eyes, expressions, etc., establishing a correct and objective first impression will be of great benefit to the future development of your relationship.
Fourth, keep a normal mind
Whatever is destined to belong to you must be yours, and you must not invest your emotions and body too early and too quickly. Even if you give everything that is not yours, you will get nothing, except emotional and physical and mental harm.
Fifth, do not commit yourself to others easily
Whether you are a man or a woman, it is often difficult to control your enthusiasm during a relationship. However, too many love tragedies tell us Us: Only when you know and trust someone deeply can you give your all. Many people find it difficult to bear the pain of emotional and physical and mental injuries in a relationship! Therefore, we advise you to cherish your emotions, restrain yourself, and be reasonable. Only in this way can you be more likely to gain happy love.
6. Please do not enter into a loan relationship with netizens
In the news, we often see incidents of being defrauded of property by netizens. We remind users of college student marriage websites not to enter into financial or loan relationships with netizens. Loan and loan relationships for items. What are the tips and precautions for making friends online?
The most important thing is to prevent fraud and protect your privacy.
The trick is to join more groups and participate in discussions. Know more people and pay attention when making a room. What are the matters?
Hello, 1. If you are on the top floor, check if there is any water leakage on the roof; 2. Are the main switch and leakage protector available? Are the electricity officially and connected? Some have zero-hour electricity; if For all sockets that are available in the region, try to see if they are correctly installed and usable (there are dedicated socket circuit test instruments); bring an electric pen and socket circuit test instrument with you. 3. Water. Whether tap water, hot water, reclaimed water (if any) is connected, and whether the water pressure is sufficient; whether the pipelines are leaking; whether the temperature of the hot water is sufficient; whether all switches are available; 4. Heating (this year's fee will be paid after moving in, That is, pay again in winter), gas. Whether it is connected or not, the reading base of the meter should be zero. Whether radiators are available, rough houses should generally have them. 5. How many door keys are there in total? Is it easy to use (try opening and closing all keys). Check whether the door is damaged, warped or deformed, and whether the switch is flexible. Cat eye is available. Figure it out and make the transition. 6. Property fees can be paid, but the deadline must be specified. The decoration deposit will be paid when the decoration is completed. The electricity bill is based on the meter reading and is only due after the delivery date.
7. Are the anti-theft intercom and visual systems in good condition and available (try it too); 8. Are broadband and telephone lines available and available (it is best to try it), and bring a phone with you; 9. Are the windows tight? Whether there is water leakage, the inside of the window sill should be 3-5MM higher than the outside (otherwise water will flow back in); whether it can be opened flexibly, and whether the switch is intact and usable; 10. For the toilet, check the corresponding position of the building directly below to see if there is a sewer pipe for the washbasin If there is no S-bend pipe (to prevent odor from passing through), you should pay attention to it during decoration and construction. This article is to remind you for decoration. It has nothing to do with handover.
Precautions for house delivery acceptance
1. Recommended house closing date
Generally, real estate developers notify owners that the handover time will be relatively early. It is recommended that you do not wait for the first and second house closings. Go to collect the house on the second day, because during those two days, there will be many people coming to collect the house at the same time, and the person who will accompany you to inspect the house will not have much time to accompany you to see the house carefully. It is best to postpone it a few days later. good.
2. Tools that need to be brought
1) 1 plastic washbasin - used for checking and accepting sewer pipes
2) 1 small hammer - used To check whether the walls and floor of the house are hollow
3) 1 feeler gauge - used to measure the width of cracks
4) 1 5-meter tape measure - used to measure The clear height of the house
5) 1 multimeter - used to test whether each strong current socket and weak current are unblocked
6) 1 calculator - used for calculation Information
7) 1 pen
8) 1 small stool, some newspapers, plastic bags, and packaging rope (for long periods of time, you can take a break and pre-close the sewer pipe)
It is recommended to go at 8:30 in the morning or 2:30 in the afternoon.
3. Process
1. Go to the property department to check the information section. There are several pieces of information that need to be checked:
House A’s "Residential Quality Guarantee" - —Can be taken away
B "Residential Instruction Manual" - Can be taken away
C "Complete Acceptance Record Form"
D Area Measurement Form
E pipeline distribution as-built drawing (water, strong electricity, weak electricity, structure) - can be taken away
It usually takes 10 minutes to review the data.
2. Verify the area, contract and price issues.
Confirm whether the drawings attached to the sales contract are consistent with reality, whether the structure is the same as the original design, whether the area of ??the house has been actually measured by the real estate department, and whether there is any difference from the contracted area. (Check the house sales contract first to see how much the error is. It is generally 3%. The difference within 3% will not be considered. The excess will be dealt with. It is recommended that the contract should have an error of 2%, but it is better not to exceed 5%.) According to the agreement between both parties, The contract shall be signed. Generally, this time varies depending on the person. It takes 30-40 minutes. After reading the information, you can basically go to inspect and accept the house. Tip: Don’t pay some property fees and related expenses for the time being. At this time, the property management will urge you to deliver. , you can communicate with them and pay the fee after acceptance.
Get the keys from the property management office. There should be floor keys, entry door keys, mailbox keys, etc. Then you can go to the house with the property management staff.
(1) Check the quality of the house in detail, including whether there are cracks in doors, windows, balconies and other parts; (the risk of cracks in balconies is high) Tip: Since the new house takes a long time to be empty and closed, there will be some cracks in the door and window tracks. Dust and construction debris, so don’t be impulsive and push or pull doors and windows with brute force. When you feel blocked, check carefully and use a broom to clear it.
(2) Check the wall Smoothness of the body, whether there is water seepage, whether there are cracks Tips: Especially check whether there are water marks on some walls, especially some gables, kitchen sanitary tops, exterior walls, etc. If so, be sure to find out the cause as soon as possible.
(3) Carefully check whether there are any cracks in the shell on the ground. Tip: If there is a hollow, be sure to instruct the property management personnel to repair it as soon as possible, otherwise it will be easy to break through the floor during decoration and hinder neighbor relations. The tools available for the above 2-3 items are a small hammer and a feeler gauge.
(4) The smooth flow of water, electricity and coal and whether it can be used normally. Open the faucet wide to check for leaks and blockages, and try to make the water flow larger and faster. First, check the water pressure, and second, test the drainage speed.
(Generally, new houses will be equipped with a simple faucet for the owner). Use a multimeter to measure whether each strong and weak current is flowing smoothly. Tip: Close the branch circuit and check whether each branch circuit fully controls each branch line.
(5) To check the drainage situation, first fill the basin with water, and then pour water into each drainage location, including basin drainage, bathtub drainage, toilet drainage, kitchen and sanitary and balcony floor drain, etc. Basically, every About two basins of water should be poured into the drain. You should hear a gurgling sound and there should be no accumulation of water on the surface. Tip: After doing this and confirming that there is no problem, you should drain these protruding drains (such as basin drain, bathtub drain, toilet drain) as soon as possible. Use a plastic bag to cover the drain, and then tie it tightly, while drains such as floor drains need to be plugged tightly. (Remember to leave a place that can be pulled off).
(6) Check and accept the water conditions on the ground. Drain water in the toilet, just shallow (about 50px high). Then make an appointment with the owner downstairs to inspect the ceiling of his bathroom in 24 hours. Tip: After all the water is used up, you should turn on the water meter again, read the water meter number clearly, and record it. At the same time, record the electric meter number.
(7) To measure the floor height of the building, use a 5-meter tape measure.
Hope you adopt it!
Precautions for house delivery 1: Inspection information\r\n1. The "Residential Quality Guarantee" of the house (the original stamped copy can be taken away). \r\n2. "Residential Instruction Manual" (the original stamped copy can be taken away). \r\n3. "Completion Acceptance Registration Form" (stamped original). \r\n4. Area measurement table/measured area details of the surveying and mapping unit (can be a photocopy but must have a seal). \r\n5. As-built drawings of pipeline distribution (water, strong electricity, weak electricity, structure)/as-built drawings of projects or construction drawings of the design unit (can be taken away). \r\n6. "Construction Project Quality Certification". \r\n7. "Comprehensive Acceptance Certificate for Real Estate Development and Construction Project Completion". \r\n8. When signing, please indicate "The condition of the building is unknown."\r\nNotes on handover 2: Building structure\r\n1. Check the house for cracks. \r\n(1) Check whether there are any cracks on the floor and roof of the master bedroom and living room near the terrace. Cracks running parallel to the beams in the room will not impede use after being repaired. If the crack is at a 45-degree angle to the corner of the wall or perpendicular to the beam, it indicates that the house has settled seriously and has structural quality problems. \r\n(2) Are there cracks on the walls on both sides of the terrace? If so, it is a serious quality problem. Structural problems in houses often occur on the balcony. If you find a crack at the connection between the room and the balcony, it is likely to be a precursor to the balcony breaking. \r\n(3) Whether there are cracks in the load-bearing wall. If the cracks penetrate the entire wall and penetrate to the back, there are hidden dangers. \r\n(4) Whether there are any cracks in the wall, corner joints, and ceiling. \r\n2. Check the hollow drum. \r\n(1) Check whether there are cracks in the shell on the ground. Knock all the ground, especially around the base line. If you hear a hollow sound when you tap on each surface, it means that there are gaps in the contact between each surface layer and the wall (ground) surface and need to be reworked; if you hear a dull knocking sound, it means that they are in good contact. \r\n (2) Check whether there are bulges or depressions in the walls and ceiling floors, and tap them with a wooden stick to see if there is any hollow sound. \r\n3. Check the tilt and level. \r\n(1) Tie a heavy object on the roof with a string, lower it against the wall to the foot of the wall, and check the degree of inclination from all sides. \r\n(2) The ground is roughly flat by visual inspection. \r\n(3) Check the flatness of the wall. Whether the walls and ceiling floors are particularly tilted, bent or wavy\r\n4. Measure the floor height of the room. \r\nThe building floor height is 2.8 meters, and the actual height cannot be less than 2.6 meters. The actual height of a floor height of 3 meters cannot be less than 2.75 meters. The floor height of residential buildings cannot be less than 2.8 meters. \r\nThings to note when handing over a house: Leakage, drainage and waterproofing\r\n1. Check whether there are leaks in the house\r\n (1) Check the water seepage on the ground and top floors of the house. \r\n(2) Check whether there is discoloration, blistering, peeling, or dust on the walls of the house\r\n(3) Whether there are water stains on the wall, corner joints, and ceiling. \r\n(4) Check whether there are leaks in the kitchen, bathroom (top surface, exterior wall), the top of the balcony and the pipe interface. Keep an eye out for peeling paint or mold growth on the toilet ceiling. \r\n2. Drainage\r\n (1) Check the drainage situation to see if it is smooth. They are basins, toilets, bathtubs, and bathroom, kitchen, balcony floor drains, etc. (you should hear a gurgling sound and there should be no accumulation of water on the surface). There should be no accumulated water on the qualified floor, because the floor drain is the lowest point, but a certain height of the floor for later paving is left around the floor drain of the rough house.
Make the water flow as large and urgent as possible, check the water pressure, and test the drainage speed. \r\n (2) Are there any cracks in the toilet and bath appliances? Are there any leaks in the toilet flushing tank? Are the interfaces between the bathtub, bidet and wall or cabinet properly waterproofed? Are the sink faucets in place properly? \r\n3. Waterproof\r\n (1) Drain water in the toilet and bathroom (about 2cm high), and check the ceiling of the toilet and bathroom after 24 hours. \r\nNotes on handover four: indoor details\r\n1. Pipes\r\n (1) Whether the surface coating of various pipes is intact and not damaged. \r\n(2) Check whether the water pipes are frozen or cracked. \r\n (3) Feel the elbows and valves with your hands to see if they are wet (leakage). \r\n (4) Whether the sewage pipe has a water-retaining and odor-proof elbow and an odor-proof floor drain. \r\n2. Door (front door, room door) \r\n (1) Whether the inside, outside and top surface of the door are painted, whether there are any drops, and they are smooth and without bumps. The top of each door must be painted. \r\n(2) Visually check whether the four sides of the door are parallel and close to the door frame, and whether the gap is too large (especially the door lock side). \r\n(3) Test whether the door operates freely and whether there is any special sound when opening and closing. \r\n(4) Test whether the door lock operates freely; see whether the door lock is installed firmly; see whether the door key and door lock are sealed; see whether the door plug is inserted too little, too long or too tight. \r\n(5) Close the door to listen to the sound insulation effect and understand the degree of sealing. \r\n(6) The bathroom door is not required to be tightly closed. In order to be waterproof, it is stipulated that the lower part must be 1.5 cm away from the ground. The quality of the paint on the windows mainly depends on it, and the bathroom door also needs to be painted underneath. \r\n3. Windows\r\n (1) Check the paint quality of doors and windows to see if there are any signs of dripping paint, leaks or bumps, and whether the color is consistent. \r\n(2) Visually check whether the four sides of the window are parallel and close to the window frame; whether the joints of the frame and wall are dense and seamless. \r\n(3) Check whether the window glass is intact. \r\n(4) Whether the test window can be opened and closed or pushed and pulled flexibly. Is the opening and closing of the window too tight? \r\n(5) Check whether the window is deformed after closing and whether the sealing strip is intact. \r\n(6) Test whether the lock pin operates freely and whether it is inserted too little, too long or too tight. \r\n(7) Check if there are any water stains under the window sill. If so, the window may be leaking. \r\n (8) Pay attention to whether the marble on the window sill is cracked, and whether there are any gaps in the concrete interface near the window. You can touch the window sill lightly with your hands, on the principle of not scratching your hands. \r\n(9) Are there any water stains under the window sill? If so, the window may be leaking. \r\nNotes on house delivery five: Living facilities\r\n1. Power supply\r\n (1) Turn off the power. Check whether the electric switch and electric meter can control the indoor lamps and indoor sockets. The method is to check whether the indoor power is completely cut off after the switch is turned on. If there is a disconnected switch indoor, check it separately as well. \r\n(2) Insurance socket. Sockets 30 centimeters above the ground must have safety devices. \r\n (3) The power socket in the bathroom should be a moisture-proof socket and have splash-proof measures. The lighting lamp holder in the bathroom must be a magnetic safety lamp holder. There should be no socket above the wash basin. \r\n(4) Check the firmness of switches and sockets. \r\n(5) Check whether the vertical distance between strong and weak current exceeds one meter. If the distance does not meet the requirements, it will affect the TV viewing effect in the future. \r\n(6) Use an electric pen/small light bulb to measure whether each strong and weak current is flowing smoothly. \r\n2. Gas\r\n (1) Kitchens and bathrooms should be arranged close to ventilation ducts, which will facilitate the rapid discharge of odors, exhaust gases and other gases and keep indoor air clean. \r\n(2) Whether the gas is flowing smoothly. \r\n3. Telecommunications and lines\r\n (1) Open the line interface of the phone and TV, and pull it hard to see if it is fake. \r\n (2) Whether telephone lines, closed-circuit television lines, and broadband are smooth and in place. \r\n(3) CCTV monitoring system, building video intercom system, home security alarm system. \r\n(4) Peripheral prevention management system, offline smart patrol system, background audio and broadcast system. \r\nNotes on house delivery 6: Others\r\n1. Check whether there are any omissions in the facilities, devices, etc. specified in the sales contract, and whether the brands and quantities match. \r\n2. Read the values ??of electric meter, water meter and gas meter. \r\n3. Is there a dedicated garbage channel and whether it is blocked. \r\n4. Is there a dedicated postal box? \r\n5. Check the air conditioner positions and holes in the living room, south and north bedrooms. \r\n6. Inquire about the south balcony closure plan. What are the precautions for Ulaite?
Serum electrolytes should be measured and renal function should be checked before taking this drug for the first time.
What should you pay attention to when handing over a house?
1. Whether the roof or floor is cracked
2. Whether the kitchen and sanitation are waterproofed well
3. Whether the windows are in compliance with the requirements on all sides The wall is well sealed
4. Whether the indoor wall surface is flat
5. Whether the floor height meets the requirements
6. Whether water, electricity, gas, etc. are connected to the home, Whether the meter is reset to zero
7. Whether the public facilities in the community achieve the publicity effect when buying a house
8. Whether the security facilities are in place - monitoring, infrared radiation system, vehicle management system , unit access control system, community access system, etc.
9. Whether the road surface and greening of the community achieve the publicity effect.
10. Whether the distance between the houses reaches the specified distance? What are the precautions for handing over the house?
Things to pay attention to when closing the house. Pay attention to receiving the occupancy notice in time.
1. This is The first step in closing a house is to pay attention to the deadline. Generally, the delivery time limit agreed by the developer is within 30 days after the notice is sent, so the home buyer must arrange the time well.
2. After receiving the notice of occupancy, you should first determine whether the developer has delivered the house as scheduled. If the house is overdue, you should put forward handling opinions and decide whether to go to collect the house based on the developer's reply. Go to collect the house according to the time agreed on the notice.
Special reminder: Pay attention to the deadline for house repossession. Missing the house repossession date will cause much trouble. The closing date can be brought forward but not postponed. If the actual delivery date exceeds the resumption date stipulated in the contract, you may consider claiming compensation from the developer according to the contract.
If you are unable to attend as scheduled due to special circumstances, you can entrust relatives, friends, or lawyers in writing to do so, or you can contact the developer promptly to discuss another time and confirm it in writing.
If the home buyer does not go to the designated location to handle the relevant house closing procedures within the agreed time, from a legal perspective, it is generally deemed that the developer has actually delivered the house to the buyer for use, and the buyer should start from From the deadline of the notice, you will be responsible for all risks and taxes of the property purchase. What are the precautions for the handover of a new house
1/8 step-by-step reading
Before the handover of a new house, the developer will notify and send a handover notice to the owner, and the owner will prepare according to the content written in the notice Relevant formalities and documents.
Expand the long picture
2/8
According to the date written on the handover notice, the owner will register at the sales office. At this time, there will be a community service staff Accompany the owner to view and inspect the property with the key.
3/8
After entering the room, you must first see where the distribution box is, and then turn it on in sequence according to the location signs. Check whether the simple circuit is normal. Take a look at the number displayed on the electric meter to see if it is zero or close to zero.
4/8
Then check the water meter and gas meter. They should also show zero or a number close to zero when the new house is handed over.
5/8
The most important thing is whether there are cracks in the wall, top, and floor, and whether the wall is obviously uneven. Of course, the place where the top and wall meet is a bit small. Cracks are normal.
6/8
Take a look at the window to see if the window switch is easy to use. If there is a guardrail, check whether the guardrail installation is fixed and safe.
7/8
If there are no problems after the inspection, you can go to the sales office to go through the procedures and get the keys and house accessories.
8/8
There are many procedures for signing, so be sure to pay attention to the content before speaking, and don’t be anxious. What are the precautions for new house transactions?
Fifteen Tips for Negotiating a House
(1) Leave room for bargaining for yourself. If you are the buyer, bid lower. However, you can’t haggle randomly, and the price you cut must be within a reasonable range.
(2) Let the other person speak first, let him express all his requirements, and hide your own opinions first.
(3) Let the other party make concessions on important issues first. If you are willing, you can also make concessions on minor issues first.
(4) Let the other person work hard for everything they can get, because people don’t value things that are easily obtained.
(5) Don’t give in too quickly. It’s better to give in later, because the longer he waits, the more he will cherish it.
(6) Concessions of the same level are not necessary. For example, if the other party gives you 60%, you can give him 40%. If the other party says that you should give me 60%, you can politely refuse the other party by saying that I can't afford it.
(7) Don’t make unnecessary concessions. Every time you make a concession, you must gain some benefits from the other party.
(8) Sometimes you might as well make some concessions that won’t cost you anything.
(9) Remember "I will consider this matter." This is also a kind of concession.
(10) If you can't have a big meal, find a way to get a sandwich; if you can't get a sandwich, at least get a promise.
(11) Don’t take it lightly, remember that every concession contains your profit.
(12) Don’t be embarrassed to say “no”. Most people are afraid of saying "no". In fact, if you say it enough times, he will believe that you really mean "no". So be patient and be consistent.
(13) Don’t cheat. Even if we make concessions, we must always maintain a favorable situation across the region.
(14) If you want to go back on your word after making a concession, don’t be embarrassed, because it is not an agreement, and everything can be started over.
(15) Don’t make too many concessions too quickly or too much to avoid the other party insisting too much on the original price; during the negotiation process, always pay attention to the number and extent of the other party’s concessions. What should you pay attention to when handing over a villa?
When a new house is handed over, property fees will begin to be paid. If there is no decoration, a deposit will be required. In some communities, you need to pay the gas connection fee and cable TV fee. The house will not be shown until the house is taken over. Therefore, the interior of the house basically depends on the main area. The area will be a little different when the house is handed over. The developer will also pay the developer to pay for the house.
Notes: 1. Check all sockets. Friends who do not have a pen can get a charger and a three-phase power strip. The charger can check the two-phase socket, and the three-phase connector strip can check the three-phase socket.
2 Check all windows ·Check the glass: There should be no scars on the glass. Everything we buy is a commodity, so we must check it carefully, otherwise we will suffer the loss. Don't think that it doesn't matter if there is a small scar on such a large piece of glass. Think about it if you are buying a mirror, you definitely don't want a mirror with scars. ·Check the window screens. Many screens are torn or have large scratches on them. ·Check whether the window touches the wall when it is opened. The wall is easily damaged
3. Check the phone line. The quality of the broadband interface Tianlun's phone line and broadband panel is not good, and it depends on whether it is firmly fixed! 4 Check whether the radiator and balcony guardrail are secure
5 Check every light and switch
6 Check every faucet
7. Check the "Completion" before closing the house The original copy of the "Filing Acceptance Form" and the "House Area Measurement Form", otherwise once the key is received, it will be too late to raise the area issue. In judicial practice, if no objection is raised when receiving the house, it will be deemed that the buyer has given up on the area after actually accepting the house. The right to dispute
8. When closing the house, pay attention to the window hinges and water pipes. There are many problems. When the developer delivers the house to the buyer, it means taking over the house for the buyer.