Matters needing attention in wall painting of second-hand house decoration in Dalian
1, mix well before construction.
Be sure to adjust latex paint, especially color latex paint, before construction. If there is no mixing and symmetry, the uneven distribution of pigments during construction or the precipitation of dyes after long-term storage will lead to decoration. Face bud phenomenon affects the decorative effect.
2, choose the appropriate construction method
This coating can be divided into three types: roller coating, brush coating and spray coating. No matter what method you use, you must be careful when using primer, which is beneficial and cheap to the wall. Primer can make the substrate slightly symmetrical, improve the coating speed of the surface layer and save the surface layer. Primer is much cheaper than topcoat, so it will wear less. Secondly, brushing once helps the coating to increase the fullness of the paint film, making people feel full and more textured.
3. Pay attention to the dilution rate
After buying the paint, you must dilute it properly. To get a satisfactory paint film, it is about 15% to 20%. Please refer to the instruction manual for details.
4, brush paint times
Many people assume that it is easy to paste if you brush it too many times, but at the same time, the quality of latex paint is good even if you brush it for 8 times, and 10 times will not fall off. Paint shedding is usually caused by moisture in putty. In this case, even if it is only painted once or twice, it will fall off. However, it is not necessary to apply latex paint as much as possible. Brush the basic paint on the wall, and brush the basic paint twice. Dark paint needs to be painted several times.
5, painting time interval
The time interval between two spraying depends on the drying time of the latex paint surface sprayed before. Of course, this kind of weather will be influenced by seasons and weather.