First, the flat knot fastening method
Wrap the belt around your waist to ensure the proper length. One end of the belt passes through the belt loop and is folded back. The other end passes through the folded waistband and the waistband ring. The other end is folded back again, passed through the second belt loop and tightened. The coat belt has a certain thickness, and tying two knots will not become a dead knot, and it is not easy to spread.
Second, the bow fastening method
Tie the belt in a knot, and turn the belt downward and inward twice. The lower strap is folded and passed through the outermost knot of the upper strap. Finally, pull the butterfly's wings tightly. This bow tie method is still difficult. Beautiful and generous bows are really loved by everyone.
Third, the diamond binding method
The belt wraps around the waist to ensure the proper length. One end of the belt passes through the belt loop and is folded back. Cross the two ends, pass the right belt end through the left belt end, then pass through the belt ring from below and tighten. The left belt end passes through the belt ring from above and through the right endless belt end. Pass the left belt end through the belt ring again from above and tighten it to form a diamond-like knot.
Four, catfish fastening method
Wrap the belt around your waist to ensure the proper length. One end of the belt passes through the belt loop and is folded back. The other end passes above the belt ring, and then passes through the belt ring from below. The other end passes through the belt loop again, pulling it through the two belts in the front belt loop.
The other end is wound around the rear belt loop and passes through two belts in the front belt loop. The other end bypasses the front belt loop and passes through two belts in the front belt loop from behind. The other end passes through the belt buckle and is fastened to form a catfish button-shaped knot.
Five, reverse binding method
The reverse structure is a reverse knotting method, which is different from the traditional knotting method. Wrap the belt around your waist to ensure the proper length. Pass one end of the belt through the belt loop and fold it again. The other end passes through the lower part of the belt loop to reach the crease at the first end. Pass the waistband at the second end through the waistband crease at the first end to form a loop. Pass the waistband at the second end under the loop, and then pull the waistband loop to form a reverse knot.
Sixth, the binding method
First, tie the waistband, the upper waistband passes horizontally above the lower waistband, and then the upper waistband passes from the inside from bottom to top, and the scarf knot is completed. This tie will be very simple and advanced, and the whole coat will be very stylish.