Before introducing how to enjoy a website with unlimited traffic for one month and browse any information on the internet casually, we need to know some basic knowledge and theories, otherwise it will probably bring us a lot of trouble and even make us lose a lot of money in the future.

Because we are going to use notebook +GPRS mobile phone to surf the Internet, in fact, GPRS mobile phone is equivalent to a modern one, so figuring out how to set up mobile phone to surf the Internet is the premise to ensure the notebook to surf the Internet normally.

At present, there are two main types of mobile Internet access, namely CMWAP wireless Internet access and CMNET wireless Internet access. So what's the difference between CMWAP wireless Internet access and CMNET wireless Internet access? What's their scope of application? What kind of Internet access should be used under what circumstances? The following is a theoretical explanation for readers.

(1) Why do CMWAP and CMNET coexist?

Generally speaking, most countries in the world have only one GPRS access mode, while China has two brothers, CMWAP and CMNET? These two brothers are both mobile Internet services, and CMWAP and CMNET are just two GPRS access methods artificially divided by China Mobile. The former is set for WAP Internet access, while the latter is mainly for GPRS Internet access services such as PC, notebook computer and PDA. There is no difference in implementation between the two, but due to different positioning, compared with CMNET, CMWAP has some restrictions and differences in tariffs.

(2) 2) What are the limitations of CMWAP compared with CMNET?

In order to distinguish the positioning of the two in application, China Mobile has imposed certain restrictions on CMWAP, mainly because CMWAP can only access IP (10. * * *) in the GPRS network, but unable to access the Internet through routing. (Mobile networks in a few areas may not have this restriction. ) We use CMWAP to browse the web pages on the Internet through WAP gateway protocol or its HTTP proxy service. In other words, there are few sites that browse the Internet through CMWAP. If a website doesn't have WAP service, then we can't view its content through CMWAP. At present, Sina, Sohu and other large websites have opened corresponding WAP sites, and we can only browse these WAP sites through CMWAP. CMNET, on the other hand, has no restrictions, just like the information we browse through ADSL dial-up.

(3) 3) What's the difference between 3)3)CMWAP and CMNET in cost?

Because CMNET is completely connected to the Internet, the use cost is very high. Generally speaking, there is no CMNET that does not limit traffic. I'm afraid it's common to spend hundreds of dollars a month surfing the Internet through CMNET. CMWAP, on the other hand, is different, because all accesses are internal networks, so generally speaking, the online traffic is unrestricted, and the monthly fee is also very cheap, 10 yuan to 30 yuan. Take Shenzhouxing users in Beijing as an example. If you use CMWAP for one month without restricting traffic, you only need to pay 15 yuan. If it is made after 16, it will only cost 8 yuan by the end of the month.

Seeing this, some readers may ask, cmwap is cheap, but there is no way. Money is still wasted. In fact, I will introduce you step by step how to access the information of CMNET through CMWAP, which is equivalent to spending 15 yuan unlimited monthly traffic to enjoy hundreds or even thousands of CMNET services that can be provided to us. Of course, before continuing to introduce the following contents, please be sure to distinguish the difference between CMWAP and CMNET. CMWAP is limited but cheap, and CMNET is unlimited but expensive.

Second, the service is opened:

There is a special network card in the market, which is an interface card+a chip. This chip is actually the same as the card in our mobile phone. This kind of network card inserted in the PCMCAI slot of a notebook computer has similar functions as a mobile phone, but its price is only about half of that of a mobile phone. It can be used to surf the internet, and of course it can also be used to make phone calls and send text messages. For friends who have a lot of short messages, is it much more convenient to edit short messages on a laptop?

A very important part of CMWAP is to look at the mobile phone card. At present, there is no monthly fee for the Shenzhouxing GPRS card in Beijing, and there are telephone charges for activation in different periods, which is especially popular among poor people like me. Moreover, the browsing function of CMWAP is not limited to traffic, time and roaming, so our mobile phone card also meets the requirements.

Tip:

Maybe you are using a different type of mobile phone card or you are not in Beijing. You only need to consult the local China mobile service personnel to find out (roaming is generally not allowed).

Then the following is the steps to open the CMWAP service of Beijing Shenzhouxing. The toll-free number of China Mobile is 10086 1. After dialing this number, you can easily open CMWAP service according to the prompt. Open the phone for less than three minutes. Of course, it is worth noting that you must use your own mobile phone to dial and open CMWAP service, and you can't use fixed phones or other mobile phones, which prevents misoperation.

Tip:

The service of China Mobile is still very good. 10086 1 has a 24-hour telephone. I dialed the number of 12 this morning. The service lady has a good attitude and gave me a detailed explanation on several issues.

We will receive a short message from China Mobile after dialing the opening number, and the monthly fee of 15 yuan will be deducted immediately. At this time, we can insert the SIM card into the network card and access the CMWAP network. Be careful not to modify WAP settings, including proxy server address and port, before accessing CMWAP network.

Third, summary:

Because of the different regions and types of mobile phone cards used, you must consult the local telecom to find out clearly, and distinguish between CMWAP and CMNET when opening, so as to avoid paying huge tuition fees on CMNET by mistake.

Connecting articles

The first step, the notebook is generally XP system, which can automatically identify the GPRS network card sold by this station as a standard PCMCIA device. When we insert the SIM card into the GPRS network card and the notebook computer, the system will automatically identify and prompt to install the corresponding driver, so we can choose the standard PCMCIA device.

Step 2 After installing the driver, we right-click "My Computer" and select "Properties". In the Hardware tab of Device Manager, we will see the new device-modem standard PCMCIA modem, which is the corresponding network card.

Step 3: Because the notebook has a modem by default, in order to avoid unnecessary conflicts, we need to

Stop using it, after all, conflict problems are sometimes difficult to judge and solve. Right-click IBM's own modem and select Disable.

Step 4: When prompted whether to prohibit the equipment, select "Yes".

Step 5: After the ban, a red cross appears in front of the device, indicating that it can no longer be used, so that our modem has only one corresponding to the mobile phone.

Second, the dial-up establishment:

Establish a dial-up connection for this modem.

Step 1: The next step is to establish a network connection. Let's go to the control panel of the system and select "Network Connection".

Step 2: In the open network connection window, we click "Create a new connection" under the network task.

Step 3: The system will automatically open the New Connection Wizard.

Step 4: Select "Connect to the Internet" in the network connection type, and then continue to the next step.

Step 5: Next, continue to select "Set my connection manually" and continue to the next step.

Step 6: The following is to set the dialing type. We select "Connect with a dial-up modem" and proceed to the next step.

Step 7: Enter the name of the ISP, and we can choose any one. For example, I set it to xtcom and then the next step.

Step 8: Pay special attention to the telephone number here. We enter *99#. The online information mentioned that if *99# cannot be dialed, you can try to dial * 99 * * 1 #.

Step 9: We don't have to worry about the last username and password and the password confirmation window. It's all empty.

Step 10: After all the settings are completed, we set up a dialing icon named xtcom.

Third, the system dial-up connection:

After the dial-up is established, we will connect to the network. Step 1: Double-click the xtcom dial icon on the desktop.

Tip:

We also need to set a location before dialing the internet. This place is not necessary, it is just a troubleshooting means when the dial-up connection cannot be successfully established without setting. In addition, if your mobile phone has CMWAP and CMNET, the newly established dial-up is likely to be connected to CMNET, and you have to pay an unknown fee again. To prevent wrong connection to CMNET, you need to enter Device Manager and select the "Properties" of the modem corresponding to the mobile phone;

Then add the following information in the advanced tab of the properties window-"at+cgdcont =1,"IP "and" cmwap ".

After confirmation, dialing will only connect to CMWAP. .

Step 2: The above tips do not need to be set in most cases. Clicking the "Dial" button directly after opening the connection will automatically trigger the mobile phone to dial.

Step 3: At this time, make sure that the SIM card is put into the network card correctly and the driver is installed correctly, otherwise, a 692 error message "Modem hardware failure" will appear.

Step 4: If all goes well, the successful dialing will result in the same "Online Registration" prompt as using an ordinary cat to surf the Internet.

Step 5: After the connection is established, we will see the displayed speed in the taskbar, which is generally 1 15.2Kbps (this is the speed between your network card and your computer).

Step 6: Clicking on the link will also display status information, including the amount of data sent and received and the connection time.

Step 7: The details tab of the status window displays the IP addresses of the server and the client, generally starting with 10. As stated in the article "15 yuan Monthly Mobile Phone Access to the Internet", CMWAP is an intranet.

Step 8: At this time, we can log in to QQ. We just need to set it as an HTTP proxy on the proxy server, and the address is 10.0.0. 172. By default, we choose port or 80. After testing, the proxy server works normally.

Step 9: We can log in to QQ normally, and we can see that our IP address is 211.13.33.39, and QQ shows "Beijing Mobile" with IP information.

Four, software dial-up connection:

In fact, the method of realizing CMWAP by establishing system dial-up in notebook is rather troublesome, and in actual use, some people will encounter CMWAP but switch to CMNET from time to time, which will bring huge traffic cost. You can try the dialer in the driver that comes with the GPRS network card. You can set APN to cmwap, which can effectively avoid dialing cmnet by mistake. Mobile has a very convenient dialing program: China Mobile E-line client.

Download address:

, 126 , 163

Gprs network card+notebook: this is much simpler than surfing the internet with a mobile phone.

1. Install GPRS wireless network card management software,

2. Establish a new connection in the management software of the wireless network card, such as gprs, and the access point APN is cmwap.

3. User name and password with dialing number of * 99 * * 1 # or *99# are left blank.

4. Other steps are the same as above.