I. Preparatory work
1.8g or larger empty USB flash drive.
2. Making a pe boot disk: How to make a USB boot disk with a micro pe toolbox (UEFILegacy dual mode).
3. win 10 system download: ghostwin 1064-bit professional cracked version v20 19.07.
2. The steps of installing win 10 system in msi GP75Leopard9SE-455CN notebook are as follows.
1. After making the wepe startup disk, copy the iso image of win 10 system directly to the USB flash drive;
2. Insert the pe boot disk into MSI GP75Leopard9SE-455CN computer, press F 1 1 to start the shortcut key after restarting, bring up the startup menu dialog box, and select the recognizable U disk option, usually the name of the U disk or the words with USB, such as SanDisk. If you want to install in uefi mode, select the project with UEFI mode and press enter;
3. Select the resolution of windowspe. By default, the 1 th resolution is selected, or you can select the second specified resolution and press Enter.
4. After entering pe, double-click the partition assistant on the desktop (lossless), select disk 1, and click Quick Partition. If there are multiple hard disks, choose the right one and don't delete it by mistake.
5. Set the partition number, partition size and partition type for msi GP75Leopard9SE-455CN notebook. The system disk of the system is recommended to be labeled above 60G. Since UEFI is selected to start, the disk type should be GPT, the partition alignment should be 4k, 2048 sectors will do, or 4096 sectors will do. Click Start after confirmation.
6. The zoning process is very fast. After the partition is completed, as shown in the figure, there will be two ESP and MSR without a drive letter in the GPT partition. Don't move these two partitions, just look at your separate disk C and D. If the drive letter is occupied, select the disk that has occupied drive C, choose to change the drive letter on the left, and so on. It is ok not to change, and the position of the system disk can be judged according to the label system.
7. Then open the this pc-Micro PE toolbox, right-click the iso image of win 10 system, and select Load. If there is no loading option, right-click to open Method-Resource Manager;
8. Double-click and double-click the installation system. Exe, run the installation tool, select the recovery partition, and the GHOWIMISO image path will be automatically extracted to win 10.gho, and then select the installation location, usually drive C, or judge according to the volume label or total size. After selection, click OK;
9. If this prompt pops up, don't worry, click Yes to continue;
10. This dialog box pops up. Choose to restart and guide the repair after completion, and click Yes;
1 1. It will take some time to go to this interface and perform the installation and deployment of win 10 system to drive C;
12. After the operation is completed, MSI GP75Leopard9SE-455CN notebook computer will automatically restart after 10 second;
13. Pull out the USB flash drive during the restart process, and then enter this interface to install, drive and activate the components of win 10 system;
14, it will take some time to restart the system automatic configuration process again;
15. Finally, the desktop of win 10 system is started, and the process of installing win 10 system in msi GP75Leopard9SE-455CN is over.
After completing the above steps, we will install win 10 system on msi GP75Leopard9SE-455CN. If you don't know how to install win 10 system, you can learn this method.