How long can phototherapy glue be used?
In general, it is best to maintain phototherapy glue for about three weeks. Too short a time is not conducive to the health and recovery of nails. If the time is too long, the radian and length of the phototherapy part can't follow the growth and change of the real nail, and the stress point moves forward, which is easy to break and tilt. Phototherapy glue, which cures the product through ultraviolet rays, needs illumination after application and has high durability. There are two types: hard and soft. The hard type is not easy to yellow, has high hardness and is not easy to wear, but it must be engraved on the nail surface to be removed. Improper operation is easy to hurt nails, weaken the protective effect of nails and easily cause fungal infection. Soft phototherapy can be removed by solvent, which is more convenient, and the hardness and gloss are improved.
The difference between phototherapy glue and nail polish glue
1, phototherapy glue is generally used in specialty store. Phototherapy glue can shape or shape nails, so as to improve the beauty of hands by changing the shape of nails. The difference between phototherapy glue and nail polish glue is that the former can make your nails wider, thicker and longer, while nail polish glue can only be colored.
2. Nail polish glue is used to color nails and is a product that replaces nail polish. It's just a layer of colored glue, dried with UV lamp. If you are an individual, I suggest you buy one-step glue, also called three-in-one glue, just like nail polish, but it is simple and convenient, and you can take more photos. If you make it easy to crack and fall off, the possible reason is that you apply it unevenly. I suggest you brush it twice. Before each painting, you can brush the brush on the bottle mouth several times. If there is not too much glue, brush it thin the first time. It doesn't matter whether the color is completely covered. You have to make a bottom first. The second time, you can brush it thicker and the color is even. Don't finish the second time, just polish it and wait for about 5 seconds to make the glue smooth, so that the nail surface will be more shiny and beautiful. You think it's hard, maybe the seal coat is too much. The seal coat is hard and easy to break, so the seal coat should be thin, unless it is a soft and elastic mosaic seal coat, which is generally only used in professional nail shops. They are all used by professional nail salons. If it's just a nail polish shop, it's cheaper by tens of dollars, but if it's phototherapy tape modeling, it's expensive, hundreds of dollars.
Causes of warping of phototherapy glue
1, when applying phototherapy glue, the technique is improper and uneven.
2. The front end is painted too thick, which is easy to become warped. It is recommended that the front end be lightly brushed with a phototherapy pen.
3, the front end of the grinding is not in place or the grinding force is too strong, which will affect the fit of the glue!
Solution: For the case that nails are thin and soft and want to be reinforced, it is recommended to use special reinforcing glue, and the effect will be better.
What is the first step in using phototherapy glue?
1, disinfection (hand disinfection: disinfectant, tool disinfection: 75% alcohol.
2, basic nail care, manicure, soaking hands, cutting finger skin, cleaning nail surface.
3. Use a sponge to polish the nail surface (pay attention to the periphery of the finger edge.
4. Clean the dust on the nail surface with a dust brush.
5. Apply desiccant and adhesive to the nail surface.
6. Apply primer to the nail surface and shine for about 30 seconds.
7. Apply the glue of the selected color. Use the same method as ordinary nail polish. Put the four fingers except the thumb into the phototherapy lamp, and then apply the thumb. Turn on the light for about 2 minutes at a time.
8. Apply the second layer evenly after taking it out, which can better reflect the color saturation. The lighting time is about 2 minutes.
9. Finally, apply a detachable sealing layer. Apply a thin layer to make the nail surface smooth, so that the nail will look flat and not thick and heavy. Turn on the light for about 3 minutes.
10. Clean the gel on the nail surface with a special cleaning liquid, wipe the nail surface with a cotton pad, apply finger edge nutrition oil after washing hands, and massage and absorb with hand cream. End.