0 10 1 is a special symbol belonging to other processes.

The 0 102 flag has been set and cannot be closed.

0 103 cannot set the flag again.

Cannot request a dedicated flag when 0 104 is interrupted.

0 105 The original ownership of this sign has been terminated.

0 106 Please insert a floppy disk into drive% 1.

0 107 The subsequent floppy disk was not inserted, and the program stopped.

0 1 10 The system cannot open the specified device or file.

0 1 1 1 file name is too long.

0 1 12 is out of disk space.

No other internal file identifiers are available for 0 1 13.

The 0 1 14 target internal file identifier is incorrect.

0 1 17 This application is running an incorrect IOCTL call.

0 1 18 Confirm that the written switch parameter value is incorrect.

The requested command is not supported by the system.

0 120 This function is not supported in this system.

The 0 12 1 flag has timed out.

0 123 There is a syntax error in the file name, directory name or volume label.

0 124 system call layer error.

The 0 125 disk has no volume label.

0 126 The specified module could not be found.

0 127 Unable to find the specified program.

0 128 has no subprocess to wait.

Run in 0 129 mode.

0 130 attempted to operate with the file handle of the opened disk partition (instead of the original disk I/O).

0 13 1 An attempt was made to move the file pointer before the beginning of the file.

0 132 Unable to set the file pointer in the specified device or file.

0 133 For drives that contain connected drives, you cannot use the JOIN or SUBST command.

0 134 attempted to use the JOIN or SUBST command on a connected drive.

0 135 attempted to use the JOIN or SUBST command on a replaced drive.

0 136 The system tried to delete the connection of the unconnected drive.

0 137 The system tried to delete the replacement parts of the drives that have not been replaced.

0 138 The system tried to connect a drive to a directory under a connected drive.

0 139 The system tried to replace the drive with a directory under the replacement drive.

The 0 140 system tried to connect the drive to the directory where the drive was replaced.

0 14 1 The system tried to replace the drive with a directory under the connected drive.

0 142 at this time, the system cannot run JOIN or SUBST.

0 143 The system cannot connect or replace the directory under the same drive.

0 144 This directory is not a subdirectory of the root directory.

0 145 directory is not empty.

The path specified by 0 146 has already been used in the replacement.

0 147 There are not enough resources to execute this command.

0 148 The specified path cannot be used at this time.

0 149 tried to connect to or replace the drive directory, and the directory on the drive was the target directory of the last replacement.

0 150 configuration. SYS file does not specify system tracing information, or tracing is prohibited.

The specified number of signal events for 0151dosmuxsemwait is incorrect.

0 152 DosMuxSemWait is not running; Too many flags are set.

0 153 DosMuxSemWait list is incorrect.

0 154 The volume label entered exceeds the label character length limit of the target file system.

0 155 Unable to create another thread.

0 156 receives the process rejection signal.

0 157 has abandoned this area, so it cannot be locked.

0 158 this area has been unlocked.

0 159 The thread identifier address is wrong.

0 160 The parameter string passed to DosExecPgm is wrong.

The path specified by 0 16 1 is invalid.

0 162 signal has been suspended.

0 164 The system cannot create other threads.

0 167 cannot lock the range of the file.

The resource requested by 0 170 is in use.

The 0 173 lock request is not important for the cancellation area provided.

The 0 174 file system does not support automatically changing the lock type.

0 180 The system detected the wrong area code.

0 182 The operating system cannot run% 1.

0 183 cannot create an existing file.

The flag sent by 0 186 is incorrect.

0 187 The specified system signal name cannot be found.

0 188 The operating system cannot run% 1.

0 189 The operating system cannot run% 1.

0 190 The operating system cannot run% 1.

0 19 1 cannot run% 1 in Win32 mode.

0 192 The operating system cannot run% 1.

0 193% 1 is not a valid Win32 application.

0 194 The operating system cannot run% 1.

0 195 The operating system cannot run% 1.

The operating system cannot run this application.

0 197 At present, the operating system cannot be configured to run this application.

0 198 The operating system cannot run% 1.

The operating system cannot run this application.

The 0200 code snippet should be less than 64K.

020 1 The operating system cannot run% 1.

0202 The operating system cannot run% 1.

0203 The system cannot find the entered environment option.

The process in the 0205 command subtree has no signal handle.

0206 The file name or extension is too long.

0207 Ring 2 stack is in use.

0208 The global file name character * or? Incorrect, or the specified global file name contains too many characters.

The signal sent by 0209 is incorrect.

02 10 could not set the signal processor.

02 12 area is locked and cannot be reallocated.

02 14 There are too many dynamic link modules attached to this program or dynamic link module.

02 15 cannot call nested LoadModule.

02 16 image file% 1 is valid, but it is not applicable to the native type.

0230 The pipeline status is invalid.

023 1 All pipeline instances are busy.

0232 pipeline is closing.

0233 There is no process at the other end of the pipeline.

More data is available.

0240 session cancelled.

0254 The specified extended attribute name is invalid.

0255 Extended attributes are inconsistent.

0258 Wait for the operation to become obsolete.

No other data is available.

0266 The copy function cannot be used.

0267 The directory name is invalid.

0275 The extended attribute does not match the buffer.

0276 The extended properties file on the mounted file system is corrupted.

0277 The extended property sheet file is full.

0278 The specified extended property handle is invalid.

0282 The installed file system does not support extended attributes.

0288 An attempt was made to release a multi-channel synchronization signal that does not belong to the caller.

0298 signal has been sent too many times.

0299 Only partial ReadProcessMemory or WriteProcessMemory requests have been completed.

0300 The operation lock request was rejected.

030 1 The system received an invalid operation lock confirmation.

03 17 In the message file of %2, the system could not find the message text with message number 0x% 1.

0487 An attempt was made to access an invalid address.

The result of 0534 operation exceeds 32 bits.

0535 There is a process at the other end of the pipeline.

0536 Wait for the process to open the other end of the pipeline.

0994 Access to extended properties is denied.

0995 I/O operation terminated abnormally due to thread exit or application requirements.

0996 Overlapping I/O events are not in the marked state.

0997 is processing overlapping I/O operations.

0998 Invalid access to memory location.

0999 An error occurred while performing an in-page operation.

100 1 recursive is too deep; Stack overflow.

The 1002 window cannot be used to send messages.

1003 cannot complete this function.

The 1004 flag is invalid.

The volume 1005 does not contain a recognized file system. Please ensure that all necessary file system drivers are loaded and the volume is not damaged.

The volume of the 1006 file has been changed externally, so the opened file is no longer valid.

The operation required by 1007 cannot be performed in full screen mode.

1008 tried to refer to a symbol that does not exist.

1009 The configuration registry database is corrupted.

10 10 configuration registry primary key is invalid.

10 1 1 failed to open the configuration registry primary key.

10 12 cannot read the configuration registry primary key.

10 13 failed to write the configuration registry primary key.

10 14 log files or other copies must be used to recover files in the registry database. Recovery was successful.

The 10 15 registry is corrupted. The structure of the file containing registry data may be damaged, the system image of the file in memory may be damaged, or the file cannot be recovered because the backup copy (or log) does not exist (or is damaged).

10 16 registry caused an unrecoverable error in I/O operation. The registry will not be able to read, write out or refresh one of the files containing the registry system image.

10 17 The system tried to load or restore a file to the registry, but the specified file is not in the registry file format.

10 18 The operation you tried to complete in the registry key (marked for deletion) is illegal.

10 19 The system could not allocate the required space in the registry log file.

1020 Cannot create symbolic links in registry keys that already have subkeys or key values.

102 1 Cannot create a fixed subitem under a variable parent.

1022 notified that the change request has been completed, and the return information has not been sent to the caller's buffer. The caller needs to enumerate all files to find the changed content.

105 1 The stop control has been sent to services related to other running services.

1052 requires controls that are not valid for this service.

1053 The service did not respond to the startup or control request in time.

1054 Unable to create a thread for this service.

1055 service database is locked.

1056 An instance of this service is already running.

1057 The account name is invalid or does not exist, or the password for the specified account name is invalid.

The 1058 service cannot be started because it has been disabled or because there are no related devices available.

1059 specifies the dependency of the circular service.

The service specified by 1060 is not an installed service.

106 1 The service cannot receive control messages at this time.

The 1062 service has not been started.

1063 The service process could not connect to the service control program.

1064 An unexpected situation occurred in the service while processing the control request.

The database specified by 1065 does not exist.

The 1066 service returned a service-specific error code.

The 1067 process terminated unexpectedly.

1068 Unable to start dependent service or group.

1069 The service did not start due to login failure.

After 1070 is started, the service is still in startup pending state.

The service database lock specified by 107 1 is invalid.

The service specified by 1072 has been marked for deletion.

The service specified by 1073 already exists.

1074 system is currently running in the last successful configuration.

1075 The related service does not exist or has been marked for deletion.

1076 The current startup has been accepted as the last valid control setting.

1077 The service has not been started again since it was last started.

1078 This name has already been used as a service name or a service display name.

1079 The account of this service is different from that of other services running on the same process.

1080 can only set the failed operation for Win32 service, not for driver.

108 1 This service runs the same process as the service control manager. Therefore, if the service process stops unexpectedly, the service control manager will not be able to perform any operation.

1082 There is no recovery plan for this service.

1083 This service configured to run in this executable program cannot execute this service.

1 100 has reached the physical end of the tape.

1 10 1 tape access file tag.

1 102 reaches the tape or partition head.

1 103 Tape access to the end of the filegroup.

1 104 There is no other data on the tape.

1 105 The tape cannot be partitioned.

1 106 When accessing a new tape with multiple volume partitions, the current block size is incorrect.

1 107 When loading a tape, the tape partition information could not be found.

1 108 failed to lock the media exit function.

1 109 failed to unmount the media.

The media in drive 1 1 10 has been replaced.

111reset the I/O bus.

There is no media in drive112.

1 1 13 There is no mapping of single code characters in the target multi-byte code page.

1 1 14 Dynamic Link Library (DLL) initialization routine failed.

1 1 15 is shutting down the system.

1 1 16 System shutdown cannot be terminated because there is no shutdown operation in progress.

1 1 17 The request cannot be run due to an I/O device error.

1 1 18 serial device initialization failed. The serial driver will be uninstalled.

1 1 19 cannot open a device that shares an interrupt request (IRQ) with other devices. At least one device using this IRQ has been turned on.

1 120 The serial I/O operation has ended due to writing the serial port again. (IOCTL_SERIAL_XOFF_COUNTER is zero. )

1 12 1 serial I/O operation ended due to timeout. (IOCTL_SERIAL_XOFF_COUNTER is not zero. )

1 122 The identifier address label cannot be found on the floppy disk.

1 123 The floppy disk sector identifier field does not match the floppy disk controller track address.

1 124 The floppy disk controller reported an error that the floppy disk driver could not recognize.

1 125 The result returned by the floppy disk controller is inconsistent with the registered one.

1 126 When accessing the hard disk, the recalibration operation failed, and it cannot be operated after retrying.

1 127 When accessing the hard disk, the disk operation failed. Try again or not.

1 128 When accessing the hard disk, it is necessary to restart the disk controller, but it is still unsuccessful.

The tape has been rolled to the end.

1 130 There is not enough available server storage area to execute this command.

1 13 1 detected a potential deadlock situation.

The base address or file offset specified by 1 132 is not properly aligned.

1 140 Another application or driver prohibits changing the power state of the system.

1 14 1 The system BIOS cannot change the system power state.

1 142 tried to create a link on a file that exceeded the system allowable amount.

The program specified by 1 150 requires a new version of Windows.

1 15 1 The specified program is not a Windows or MS-DOS program.

1 152 failed to start multiple instances of the specified program.

The program specified by 1 153 was written for an earlier version of Windows.

1 154 The library file required to run this application is corrupted.

No application is associated with the file specified in this operation.

1 156 An error occurred while sending the command to the application.

1 157 cannot find the library file needed to run this application.

1 158 The current process uses all handles allowed by the window manager object system.

1 159 messages can only be used for synchronization operations.

The source element indicated by 1 160 has no media.

The target element indicated by 1 16 1 already contains media.

The element represented by 1 162 does not exist.

The element indicated by 1 163 is part of a storage resource that is not displayed.

The device pointed out by 1 164 needs to be reinitialized due to a hardware error.

1 165 The device shows that it needs to be cleaned before further operation is attempted.

1 166 The device shows that its door is still open.

1 167 The device is not connected.

1 168 Element not found.

There is no item matching the specified item in the 1 169 index.

The specified property set does not exist on the 1 170 object.

1 17 1 The point passed to GetMouseMovePoints is not in the buffer.

1 172 The tracking (workstation) service is not running.

1 173 The volume ID could not be found.

1 175 The file to be replaced cannot be deleted.

1 176 Unable to move the replacement file to the file to be replaced. The file to be replaced keeps its original name.

1 177 Unable to move the replacement file to the file to be replaced. The file to be replaced has been renamed to the backup name.

1 178 Volume change record was deleted.

1 179 The volume change logging service is not activated.

1 180 found a file, but it may not be the correct file.

1 18 1 The log entry has been deleted from the log.

The device name specified by 1200 is invalid.

120 1 Although the device is not connected at present, it is a memory connection.

1202 tried to recall the equipment that had been memorized.

1203 The network provider does not accept the given network path.

The network provider name specified by 1204 is invalid.

1205 Unable to open the network connection profile.

1206 The network connection configuration file is corrupted.

1207 Cannot enumerate non-inclusive classes.

An extended error occurred in 1208.

1209 The format of the specified group name is invalid.

12 10 The format of the specified computer name is invalid.

12 1 1 The format of the specified event name is invalid.

12 12 The format of the domain name specified is invalid.

12 13 The format of the specified service name is invalid.

12 14 The format of the specified network name is invalid.

12 15 The format of the specified share name is invalid.

12 16 The format of the specified password is invalid.

The email name specified by 12 17 is invalid.

12 18 The format of the specified mail destination is invalid.

The credentials provided by 12 19 conflict with the existing credential settings.

1220 tried to establish a session with the network server, but there are too many sessions established with this server at present.

122 1 Other computers on the network have already used this workgroup or domain name.

1222 network does not exist or is not started.

1223 The user canceled the operation.

The operation required by 1224 cannot be run in a file opened in the user mapping area.

1225 The remote system refused the network connection.

1226 The network connection has been closed.

The destination of 1227 network transmission already has a related address.

1228 The network endpoint is not associated with an address.

1229 attempted to operate in a non-existent network connection.

1230 attempted an invalid operation on an active network connection.

123 1 Unable to access the network location. For information about network troubleshooting, see Windows Help.

1232 cannot access the network location. For information about network troubleshooting, see Windows Help.

1233 cannot access the network location. For information about network troubleshooting, see Windows Help.

1234 The target network endpoint of the remote system is not running any services.

The request has been terminated.

1236 The local system has terminated the network connection.

1237 Unable to complete the operation. Please try again.

1238 Cannot create a connection to this server because this account has reached the maximum number of simultaneous connections.

1239 attempted to log in within the unauthorized time of this account.

1240 This account is not authorized to log on to the network from this station.

124 1 The network address cannot be used for the requested operation.

1242 service is registered.

The service specified by 1243 does not exist.

1244 The requested operation cannot be performed because the user's identity has not been verified.

1245 The requested operation cannot be run because the user is not logged on to the network. The specified service does not exist.

1246 continue to work.

1247 After completing the initialization operation, an attempt was made to run the initialization operation again.

1248 There are no other local devices.

The site specified by 1249 does not exist.

1250 A domain controller with the specified name already exists.

125 1 This operation is only supported when connecting to a server.

1252 Even if there is no change, the Group Policy Framework should call the extension.

The user specified by 1253 does not have a valid profile.

1254This operation is not supported by Microsoft Small Business Server.

1300 will not assign reference rights to all callers.

The mapping between 130 1 account name and security identifier is not complete.

1302 has not explicitly set the system quota limit for this account.

No key is available for 1303. Returns a known key.

The password of 1304 is too complicated to be converted into the password of LAN administrator. The LAN Manager password returned is an empty string.

1305 revision level is unknown.

1306 indicates that the two revision levels are incompatible.

1307 The security identifier cannot be specified as the owner of the object.

1308 This security identifier cannot be specified as the primary object group.

1309 currently does not impersonate a client thread trying to manipulate an impersonation token.

13 10 cannot disable this group.

13 1 1 There is currently no login server available to handle login requests.

The login session specified by 13 12 does not exist. The session may have been terminated.

The permission specified by 13 13 does not exist.

13 14 The customer does not have the right to reserve the request.

The name provided by 13 15 is not in the correct account name format.

The user specified by 13 16 already exists.

The user specified by 13 17 does not exist.

The group specified by 13 18 already exists.

The group specified by 13 19 does not exist.

1320 The user account specified is already a member of a specific group, or the specified group cannot be empty and cannot be deleted.

132 1 The specified user account is not a member of the specified group account.

1322 The last reserved management account cannot be closed or deleted.

1323 Unable to update password. The password entered is incorrect.

1324 Unable to update password. The new password provided contains a value that cannot be used as a password.

1325 Unable to update password. The value provided for the new password does not meet the length, complexity or history requirements of the character field.

1326 login failed: unknown user name or wrong password.

1327 Login failed: user account restriction.

1328 Login failed: account login time limit was violated.

1329 Login failure: The user is prohibited from logging in to this computer.

1330 login failed: the specified account password has expired.

133 1 Login failed: The account has been disabled at present.

1332 The mapping between the account name and the security identifier is incomplete.

1333 There are too many local user identifiers (LUID) requested at one time.

1334 No other local user identifier (LUID) is available.

The subsection of the 1335 security identifier is not valid for this specific purpose.

1336 The access control list (ACL) structure is invalid.

1337 The security identifier structure is invalid.

1338 The security descriptor structure is invalid.

1340 Unable to create inherited access control list (ACL) or access control entry (ACE).

The 134 1 server is currently disabled.

The 1342 server is currently enabled.

The value provided by 1343 is an invalid identifier authorization value.

1344 There is no more memory to update the security information.

1345 The specified attribute is invalid, or the specified attribute is not compatible with the attributes of the whole group.

1346 did not provide the requested impersonation level, or the provided impersonation level is invalid.

1347 Unable to open anonymous security symbol.

1348 The requested authentication information category is invalid.

The symbol 1349 cannot be used in an attempted way.

1350 cannot run security operations on objects that have no related security.

135 1 Unable to read the configuration information from the domain controller, possibly because the computer is unavailable or access is denied.

1352 the security account manager (SAM) or the local security agency (LSA) server is in an incorrect state, so the security operation cannot run.

The 1353 domain is in an error state and cannot perform security operations.

1354 This operation can only be performed in the primary domain controller of the domain.

The domain name specified by 1355 does not exist or cannot be contacted.

The domain specified by 1356 already exists.

1357 tried to exceed the limit of the number of domains per server.

1358 The requested operation could not be completed due to serious media error or disk data structure corruption.

An internal error occurred in 1359.

1360 The generic access type is contained in the access mask, and it has been mapped to a non-generic type.

136 1 The format of the security descriptor is wrong (absolute or autocorrelation).

1362 The requested operation is only allowed for the login process. The calling process will not be recorded as a login process.

1363 Unable to start a new login session with an already used identifier.

The acknowledgement packet specified by 1364 is unknown.

1365 The status of the login session is inconsistent with the requested operation.

1366 The login session identifier is in use.

1367 The login request contains an invalid login type value.

1368 Before reading the data, the simulation cannot be performed through the named pipe.

The transaction state of 1369 registry subtree is incompatible with the requested operation.

1370 sudden internal security database failure.

137 1 This operation cannot be performed under an internal account.

1372 This operation cannot be run in this internal specific group.

1373 This operation cannot be run in this internal specific user.

1374 Because this group is currently the user's primary group, you cannot delete the user from this group.

1375 This symbol has been used as the main symbol.

The local group specified by 1376 does not exist.

1377 The account name specified is not a member of the local group.

Or right-click the desktop IE icon-Properties-Program-Manage Plug-ins-click to select a plug-in, and then click "Disable" to confirm. Try the plug-ins one by one, see which plug-ins will no longer appear after being disabled, and then completely disable them.

Finally, enable other plug-ins